My new Goals, need some suggestions!
Originally Posted by mtber
I found a new way to make 600 whp on a stock ls motor.
It is called "midget poo injection".
All you need to feed your midget is mass amounts of pancakes & poptarts!
The only downside to running "midget poo injection" is the smell you get in your car with a full poo cell.
It is called "midget poo injection".
All you need to feed your midget is mass amounts of pancakes & poptarts!
The only downside to running "midget poo injection" is the smell you get in your car with a full poo cell.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Might have to give it a shot... where do I buy this midget poo??? Mtber, can you tune the midget poo??
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
i going to rename this thread.... Why alchol injection works by alpha and mtber... lol
__________________
You can find me at the Track!
KJ built
ALPHA TUNED
Induction Performance 727.505.1423
* Engine Management Tuning, Track Setup, Consultation, Turbo Sales, Parts Sales (WorldWide)
^^^
ONLY SHOP IN TAMPA THAT TREATS YOUR CAR AS THEIR OWN
You can find me at the Track!
KJ built
ALPHA TUNED
Induction Performance 727.505.1423
* Engine Management Tuning, Track Setup, Consultation, Turbo Sales, Parts Sales (WorldWide)
^^^
ONLY SHOP IN TAMPA THAT TREATS YOUR CAR AS THEIR OWN
And "why intake temperatures will never be lower than ambient temperature with an air to air intercooler without alcohol injection"
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Maybe my IAT sensor is broke or something 

__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Maybe but something was wrong
Sensor or software.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
OMG, I just wrote a huge post and it got erased... ERRRRR!, any hoo, I wanted to say, the session that I datalogged, was at the end of a 30-45min session, were I was working on my part throttle maps, and at the end I was working on my WOT maps for low boost, I did about 5 WOT pulls from 2nd through 4th, and then single gear WOT pulls for gears 2nd through 4th, needless to say, the car was working pretty hard, And If I remember correctly the highs for that day were something like 95deg, and the session was done at 2-3pm(hottest time of the day), B4 the meth kit my IAT temps ranged from 94-108 and my EGT temps were at a steady 1200@WOT full boost 18PSI. My EGT temps droped the most going down to 1050-1100deg now. B4 I installed the kit I was very iffy about it(water in my motor?? Noooo way) but I am now a FIRM believer that this mod should be on anyones list of mods if they are going Turbo/Nitrous, Even all motor apps can see gain from this mod, again remember the Alchohol/Meth/Water will not increase your HP/TQ alone, the gains come into play by being able to run a more advanced timing map and more boost without the need for race fuels(not that they wouldn't help) but for the people already suffering from knock/detonation you will see nice gains due to the fact that if you are running a knock sensor and knocking the ECU is pulling lots of timimg away, and the kit completely eliminates the knock there for leting your ECU run on the normal igntion curve.. Agian there will be mixed opinions about this but I think anyone boosting should invest the cash to get this mod, There are kits out there ranging from $50DIY kits all the way up to $500-$600 kits that have all the bells and whisels(spelling??). Eihter way I am as happy as can be with my setup, and I dont have to worrie about melting my nice expensive motor because I wanna up the boost or advance my timing a little..
__________________
Modified Racing
Street Tuning & Dyno Tuning the greater east coast area for over 10 years and running!
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
Originally Posted by InsaneCivicSedan
Might have to give it a shot... where do I buy this midget poo??? Mtber, can you tune the midget poo??
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
midget poo > *
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831


