lol, less than one month, and he's already got 111 posts....

 

Yes, and I'm in the process of deleting 90% of them.

 

On an actual technical note, if anyone else is interested in sphericals for RLCA bushing replacement, pm me, i'm not doing this tomorrow or something, so people will have time to get funds together, and they should be approx $200-$250 for the set, depending on which series bearings are used.

 

Zero gofast mods, zero interior mods, zero aero, all suspension/brakes/drivetrain/lightness. Or just leave it alone and buy a 68-69 Toyota Crown to cruise around in.

 

Hakosuka! Then sell it to me when you get tired of it.

 

Hard wired my ignition this morning cuz my newly replaced ignition switch seems to have failed (this makes x3!). Sad to know that i'm getting "good" at doing that. Hoping to find out what the fahhh is causing that after work, maybe. Also after work, planning on going the LKQ Clearwater in search of a J30 and its rear sway bar to replace the one on my base model 240sx. LKQ's price list prices them out @ $20 if I can find one...19+mm and hollow > than my 15mm solid.

 

Anyone know where I can get pressure place to flywheel bolts for a KA24DE? Also bellhousing bolts as well.

 

Ebay, Nissanparts.cc, courtesyparts.com, dealer

 

Looked on ebay I can find regular flywheel bolts. But not bellhousing or pressure plate to flywheel.

 

They are just normal m8 bolts IIRC, they just have lock washers on them. I should have 6 though, or atleast a couple you can use to grab 6 matching ones.