put the wheels on..
sometime this week gonna lower it and put side skirts and valences back on... if it warm ups, is too cold to be working outside..
considering on painting the centers on the wheels.....................

 

if you are in the wesley chapel area watch for two guys in a nissan maxima. no tint on the windows. i spotted these guys watching my daily way to hard to be good for them.

 

Basically foam the entire subframe since its hollow. I know there was an article a few years ago about a shop over in japan that did it to a 350z. I'll try it out next weekend and see how it goes.

 

I like it alot. So simple and clean. Just lower it more! If my car hadn't had that retarded huge rear fender pull I would have done pretty much the same thing

 

I foamed my chassis with 8lb stuff from US Composites in Miami. They have a workable online store. I have a bit left over that you can have. It should be enough for a subframe. If you use it, do a test pour to make sure it's still good. I've also got some funnels and a mixing attachment for a drill. Pour time is 45 seconds, so you really need that power mixing going on.

The article you're referring to is the Opera 350Z build shown in SCC. They used 16 lb stuff, which US Composites also has. Basically drill a few 3/4" holes and start pouring. Seal it up with brass plugs, or just use that crazy metal-backed AC duct tape.


By the way, I have an SR tranny for sale. It needs the shifter assembly, input shaft plate, and lever/tob. All those parts can be taken from your KA tranny. $125.

 

Awesome, if your going to QSL tomarrow I'll swing by and pick that stuff up.

 

Cool! You wouldn't happen to have a spare VTC solenoid, would you? It just unscrews from the head. Trade me? I'll be at QSL freezing my nuts off as usual.

 

I'll grab the one off the spare NA head.

 

put a new OEM thermostat in my car, YAY for having heat in the car now!!!

 

installed rear brake pads and pick up a set of door panels.who is going to QSL tomorrow from Tampa (waters & shelddon area) . I might go depend on the wheather....