Bottom end... COMPLETE!!!
mullet racing
Joined: Mar 2001
Posts: 2,432
Likes: 0
Originally Posted by 2000CivicSi
what are the block specs??
__________________
Great accomplishment only comes with great risk. I’ll accept the crippling, gut wrenching disappointment of risking all, and failing, but only by putting my whole heart and soul, my whole being into something, will I have the chance to walk among the stars.
Those who risk nothing, those who live their lives in fear, will never have that chance.
Failure is not a sin. It’s being too afraid to even try, that is a sin.
Great accomplishment only comes with great risk. I’ll accept the crippling, gut wrenching disappointment of risking all, and failing, but only by putting my whole heart and soul, my whole being into something, will I have the chance to walk among the stars.
Those who risk nothing, those who live their lives in fear, will never have that chance.
Failure is not a sin. It’s being too afraid to even try, that is a sin.
engine building &amp;amp;best
Joined: May 2003
Posts: 11,971
Likes: 0
Originally Posted by InsaneCivicSedan
Thanks everyone... It really is a good feeling to look at it and say, "I built that", but I cant even imagine how I am going to feel when it starts up, and I actually get to hear it run...
Thanks again for the kind words everyone... Pics will be up later tonight
Thanks again for the kind words everyone... Pics will be up later tonight
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
clownin since 81'
Joined: Jan 2003
Posts: 1,672
Likes: 0
lets see those teaser pics
__________________
Any electrical/voice/data work needed or questions please feel free to PM me.
Wiring is no hobby, call an Electrician.
myspace page
Any electrical/voice/data work needed or questions please feel free to PM me.
Wiring is no hobby, call an Electrician.
myspace page
Thread Starter
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
Block is a B18A1, 81.5mm bore, NuFormz block guard, CP 81.5mm 8.7:1 pistons w/ CP rings, Eagle big bolt rods, balanced and micropolished LS crank, Clevite77 bearings, brand new Type R oil and water pumps, ARP head studs, etc...
Rang, thrust washers went in perfect, although it took a little work to keep them in place while we were droppin the crank in... I have been thoroughly impressed with this Clevite bearing kit... I know its gonna take a couple tries to start because there will be no fuel in the system at all,but I can turn the pump on to let it prime up to the normal pressure before I start it. I am also gonna crank it a bit with no fuel or spark to prime the oil pump... I am confident in this build though, so I know its going to be just fine
Pics will be up later tonight... I couldnt find the software to upload pics from my digi, so ALPHA is coming over after work to check it out and snap some pics...
Rang, thrust washers went in perfect, although it took a little work to keep them in place while we were droppin the crank in... I have been thoroughly impressed with this Clevite bearing kit... I know its gonna take a couple tries to start because there will be no fuel in the system at all,but I can turn the pump on to let it prime up to the normal pressure before I start it. I am also gonna crank it a bit with no fuel or spark to prime the oil pump... I am confident in this build though, so I know its going to be just fine
Pics will be up later tonight... I couldnt find the software to upload pics from my digi, so ALPHA is coming over after work to check it out and snap some pics...
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
engine building &amp;amp;best
Joined: May 2003
Posts: 11,971
Likes: 0
if there is a nexttime or for others just slab a lot of enginelube all over the thrusts and stick them to the block,but goodluck hope the best,not much impressed with the blockguard your useing but other stuff sounds perfect
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Thread Starter
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
Originally Posted by rangcrx
if there is a nexttime or for others just slab a lot of enginelube all over the thrusts and stick them to the block,but goodluck hope the best,not much impressed with the blockguard your useing but other stuff sounds perfect
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Thread Starter
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
Originally Posted by qitstrn
Nice. I dont see pics.
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
I love to choke people.
Joined: Apr 2002
Posts: 5,772
Likes: 0
