Random shaking in first gear ONLY
Thread Starter
Sirus
Joined: Apr 2009
Posts: 81
Likes: 0
You can't flip it, in any way. The flywheel gets un-even, hot spots and cracks. It has to be resurfaced to make new again. The new clutch disc will take shape to the old flywheel and cause the pressure plate is smooth all the un-even wear makes it chatter.
Just like doing a brake job, you can pad slap it but it's not right. Your asking for noise, and with a clutch your asking for chatter.
Alot of small shops don't resurface because they have to take the flywheel to a tranny shop to have it turned, it takes time and you might never have a problem.
john
Just like doing a brake job, you can pad slap it but it's not right. Your asking for noise, and with a clutch your asking for chatter.
Alot of small shops don't resurface because they have to take the flywheel to a tranny shop to have it turned, it takes time and you might never have a problem.
john
see dick run
Joined: Oct 2005
Posts: 1,099
Likes: 0
If the shake only happins as you let the clutch out in first or second (like above)then yes.
How long ago did they do the clutch?
john
How long ago did they do the clutch?
john
__________________
handle every stressful situation like a dog: if you can't eat it or play with it, just pee on it and walk away.
handle every stressful situation like a dog: if you can't eat it or play with it, just pee on it and walk away.
banana republic
Joined: Jan 2008
Posts: 8,819
Likes: 0
