boost yielding advice
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
boost yielding advice
okay i have JE pistons and crower rods, in my B16a2, im running 8.5:1 comp ratio what is the range of boost i could go to. some of my friends are running like 14-16 on 108 octane, and making good power. i just wanted to know if my crap would hold. right now i run 10psi on the street and it runs really nice
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Guest
Posts: n/a
i think one, for a street car you need at LEAST 9:1 WIESCO... JE is not something that i would be trying to max out... two, you can push as much as the tuner and supporting mods will let you... i would say get her sleeved then run 14-16 on the street and be happy...
-Keith
-Keith
No Ants Drift Member
Join Date: Jun 2000
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
with JE's and no sleeves, i would go no more than 14-15psi. even IF youre running low compression. it'll laggy, too, with such low numbers. IMO, i would sleeve the block, keep the rods and go endyn pistns. slap on a hondata
__________________
RIP Tim. i miss you, buddy
RIP Tim. i miss you, buddy
Registered User
Join Date: Jul 2002
Posts: 9,270
Likes: 0
Received 0 Likes
on
0 Posts
What are you making with 10lbs of boost?
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
at 10psi, it made 304@ the wheels running completely rich. i have a stock p2p ecu, a regular safc, rc 440's and yes the blue fmu, and a synapse map diffuser. it runs well but i would like to see what it can make on some 100+ on the dyno, just dont want to have to rebuild
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
i would like to get some time @ secret services to get my car running better. what are thier tunning prices
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Registered User
Join Date: Jul 2002
Posts: 9,270
Likes: 0
Received 0 Likes
on
0 Posts
I would sell the ...
* P2T ecu
* SAFC
* 440cc injectors
* FMU
* Synapse
And buy ...
* Hondata s100 with boost capability
* 3-bar map sensor
* Pigtail
* P28 ECU
* OBD-II to OBD-I conversion harness
* 580cc injectors
* Dyno time at SS
It's money but it's money well spent.
* P2T ecu
* SAFC
* 440cc injectors
* FMU
* Synapse
And buy ...
* Hondata s100 with boost capability
* 3-bar map sensor
* Pigtail
* P28 ECU
* OBD-II to OBD-I conversion harness
* 580cc injectors
* Dyno time at SS
It's money but it's money well spent.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Registered User
Join Date: Sep 2001
Posts: 2,540
Likes: 0
Received 0 Likes
on
0 Posts
304whp on 10psi out of a 1.6 with 8.5:1 compression with an FMU and no standalone.....rrrriiiggghhhhtttt, unless youre revving to 10k with a huge ass turbo im gonna have to call this one......
