ebay XTD clutch, opinion?
E=MC-hammer
Joined: Jul 2001
Posts: 3,153
Likes: 0
I have a xtd in my DD it dosnt see drift or anything too crazy, some fun from time to time but a little chatter on take off but for a DD for the money not the worst way to go also mine is a 3puck spung that was $100 shiped... so in a pinch and not looking to spend to much not bad IMO.
__________________
IM IN VA BITCH!!!!!!
www.rccustomz.com
IM IN VA BITCH!!!!!!
www.rccustomz.com
Doesnt see what you did
Joined: Sep 2007
Posts: 3,683
Likes: 0
Step 1. Go to tampa clutch supply.
Step 2. Ask for OEM maxima pressure plate, and a 4 or 6 puck sprung hub disc.
Step 3. Be happy you didnt buy the xtdshit clutch.
Step 2 may also be substituted for bring in a dead SR plate and ask them to rebuild it with more clamp load.
Step 2. Ask for OEM maxima pressure plate, and a 4 or 6 puck sprung hub disc.
Step 3. Be happy you didnt buy the xtdshit clutch.
Step 2 may also be substituted for bring in a dead SR plate and ask them to rebuild it with more clamp load.
__________________
R.I.P. Tim 
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
full on track cars can take a lot more liberties with shit than a street car. bell bottom kits and crazy wheel fitment look cool sliding on a track, but when i want to drive to taco bus, im going to ruin all of that shit. so it just doesnt work for me. function over fashion.
Originally Posted by osama tim laden
also, im about to blow my moderator status by deleteing all of davids posts
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
Thread Starter
Registered User
Joined: Apr 2008
Posts: 1,296
Likes: 0
ok that tells me enough lol
hey joe i might call you a little later today i have some questions to ask you about your setup
kings cannot fall.
Joined: Sep 2004
Posts: 7,784
Likes: 0
I have a xtd in my DD it dosnt see drift or anything too crazy, some fun from time to time but a little chatter on take off but for a DD for the money not the worst way to go also mine is a 3puck spung that was $100 shiped... so in a pinch and not looking to spend to much not bad IMO.
i have an exedy stage one in my car, and it never slips with close to 280hp, clutch kicks, standing burnouts, no problems ever.
E=MC-hammer
Joined: Jul 2001
Posts: 3,153
Likes: 0
you could have bought an exedy oem/stage 1 or whatever for about 35$ more, and not have any chatter, and it will last longer. seems like what i would do.
i have an exedy stage one in my car, and it never slips with close to 280hp, clutch kicks, standing burnouts, no problems ever.
i have an exedy stage one in my car, and it never slips with close to 280hp, clutch kicks, standing burnouts, no problems ever.
__________________
IM IN VA BITCH!!!!!!
www.rccustomz.com
IM IN VA BITCH!!!!!!
www.rccustomz.com
HookSlidinTractionBreaker
Joined: Oct 2008
Posts: 324
Likes: 0
i have an xtd stage 3 and flywheel in my car but it dont run yet.. the one my buddy has has outlasted 2 ka's and he swears by it the next one he buys will be the unsprung. stage 4 good pedal effort great grip and he dd's his with a welded diff and hasnt had a problem yet
__________________
Drop_Top_240
Fully built vert with built ka-t w/ gt28rs and hopefully nistune
s13 coupe daily drifter
"Don't touch ANYTHING!!"
Drop_Top_240
Fully built vert with built ka-t w/ gt28rs and hopefully nistune
s13 coupe daily drifter
"Don't touch ANYTHING!!"
