Hey guys. I've been wondering what parts I need to make an S14 turbo work on my S13 motor. All I have right now is the manifold from an S13, and the turbo from an S14. No lines, no outlets, nothing. Would it be better off using the T25 or the T28 intlet and outlet? Also, will the stock S13 SMIC work?

 

T25 lines will work, but you'll have to bend them. Ideally, you need all 3 of the inlets/outlets for T28, but in a pinch and/or with a welder the T25 ones will work. I wouldn't run a SMIC with anything more than 7psi on the T28.

Sounds like you have a lot of SEARCHing to do.

 

come to our shop... we can get your t28 to mount onto your s13 manifold etc... basically we will clock your inlets and outlets... weld it properly... and get you some lines installed properly... catch me on aim .. jonass00