Justin's 1997 nissan 240sx 2jz-gte swap :) Hybrid motorsports
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
ok cool ,i have the stock fuel tank cover already 
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
Mounted the manifold /turbine housing and wastegate, also modified the coolant inlet pipe: 
Garrett GT3582R chra: 
PI 3800 stall converter:
Thread Starter
Registered User
Joined: Jun 2007
Posts: 681
Likes: 0
Well mated engine & transmission and put it in to double check clearances:....everything looks good with the new mounts.
Gonna need to modify the intake manifold:
Had to remove this much off the water union on the back off the head, basically cut right above the second bead on the tube:
Gonna need to modify the intake manifold:
Had to remove this much off the water union on the back off the head, basically cut right above the second bead on the tube:
And received my driveshaft today 
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
Justing who made you the drive shaft ? can you pm a price?
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
