hey tr.. i need help on bleeding my clutch.. first of all, i juz replace my clutch master cylinder and also the slave cylinder.. brand new.. n now i'm trying to bleed it but its not pushing fluid in the clutch line.. i tried pumpin the clutch pedal several time n hold it down.. but there still no fluid going in to the clutch line.. my clutch resorvoir is filled with brake fluid but the fluid is not going down...

 

sounds like something it clogged or there is a cap that wasnt removed form the packaging. but simple ? are you opening the bleeder screw on the slave its a 8mm.

 

yeah.. i open the bleeder screw when the clutch pedal is down.. n im pretty sure i got all the caps off.. n there was only two caps..

 

okay pinches in the hard line?

 

you need to adjust the rod on the clutch master cylinder. it uses a 12 or 14 mm and it makes the pedal travel. There is a certain amount of pedal movement you need to bleed correctly.

 

its going to take hella fluid to bleed all the air out
try to get ahold of a vacuum pump makes life so much easier

 

no pinches on the hardline..

 

ok.. i gotta vacuum pump.. but still not putting fluid on the line.. everytime i pump it.. nothing is coming out..

 

Did you not try this? This is your problem 100%

 

yo.. thanx a lot bro!!! problem fix..