checked the wiring its all good im pretty sure my car is in limp mode, any pointers on how to reset the ecu?

 

It is in limp mode! Bring it by the shop and I wont charge you to check out the problem and reset the ecu! Ill guide you in the right direction and let you know if there are any wires mixed up! Also check your ecu ground by the thermostat housing! Also check your pgm-fi relay!

 

I Have Bean Working With Him Ver The Phone To Try And Diagnose His Problem. I Had Him Reset The Ecu And He Said It Started Twice Without Starter Fluid But Both Times It Would Still Have The 3.5k Rev Limit.i Told Him To Try Out A Diff Ecu And To Get A Y8 Dizzy To Maybe Correct The Problem But There Is Only So Much That Can Be Done Over The Phone.

 

Just Put It Into A Pot Of Boiling Water And Wait 5 Mins , You Will Have Rice Again My Son

 

lol well im deffinately going y8 dizzy and still lookin for a p2t or p28 chipped ecu 5spd

 

Just to verify here is the dizzy wiring so you can check it or have someone else check it.