HELP! Identify these Camshafts!
HELP! Identify these Camshafts!
Ok... I have a friend that is selling some camshafts that are not factory DOHC VTEC B series motor. They do not have any grooves at the ends or part # ingravings.
My camera sucks but i took some pics..
The Intake cam has the letter "B" stamped in the middle of the camshaft and a letter "O" on the opposite side.
The exhaust cam has a letter "J" stamped in the middle of the camshaft and a letter "O" aswell on the opposite side.
A friend had these cams in his B16 head and it idled like a monster, As if they were SK2 cams. He had his motor tuned at CFT in Orlando and they said that these cams were diffenently not stock Honda.
Any help appreciated... Also How do i go about finding the lift or duration? What lobe do i measure and what do I use to measure a camshaft?
I really want to use these in my ITR head.
THANKS!!!!
My camera sucks but i took some pics..
The Intake cam has the letter "B" stamped in the middle of the camshaft and a letter "O" on the opposite side.
The exhaust cam has a letter "J" stamped in the middle of the camshaft and a letter "O" aswell on the opposite side.
A friend had these cams in his B16 head and it idled like a monster, As if they were SK2 cams. He had his motor tuned at CFT in Orlando and they said that these cams were diffenently not stock Honda.
Any help appreciated... Also How do i go about finding the lift or duration? What lobe do i measure and what do I use to measure a camshaft?
I really want to use these in my ITR head.
THANKS!!!!
I am guessing obx because they are regrinds. The B and the J is letting the machinist know which series it is. Not engine series but series in their specs. So since I can't help you id those cam's but i found some useful write ups while i was looking...
B Series Cam Guide
VTEC Camshafts Specs / Comparison for Honda B series Engines
B Series Cam Guide
VTEC Camshafts Specs / Comparison for Honda B series Engines
Last edited by j0shth3j3w; 03-30-2009 at 01:51 PM.