HELP! Identify these Camshafts!
 

Ok... I have a friend that is selling some camshafts that are not factory DOHC VTEC B series motor. They do not have any grooves at the ends or part # ingravings.
My camera sucks but i took some pics..

The Intake cam has the letter "B" stamped in the middle of the camshaft and a letter "O" on the opposite side.

The exhaust cam has a letter "J" stamped in the middle of the camshaft and a letter "O" aswell on the opposite side.

A friend had these cams in his B16 head and it idled like a monster, As if they were SK2 cams. He had his motor tuned at CFT in Orlando and they said that these cams were diffenently not stock Honda.

Any help appreciated... Also How do i go about finding the lift or duration? What lobe do i measure and what do I use to measure a camshaft?
I really want to use these in my ITR head.

THANKS!!!!

http://www.honda-tech.com/attachment...1&d=1238424732

http://www.honda-tech.com/attachment...1&d=1238424743

http://www.honda-tech.com/attachment...1&d=1238424751

http://www.honda-tech.com/attachment...1&d=1238424760

it will help if you can post pictures we can see

pics dont work. doesnt help much

I am guessing obx because they are regrinds. The B and the J is letting the machinist know which series it is. Not engine series but series in their specs. So since I can't help you id those cam's but i found some useful write ups while i was looking...

B Series Cam Guide

VTEC Camshafts Specs / Comparison for Honda B series Engines

just sell them to me, you dont need those.


hahaha

pics aren't working?

^^they are for me

Im going to take them to a machine shop to have them measure the lift.