how much hp/boost will it hold? lets say i do forged pistions and rods would i NEED head work or would that just be a plus? this will be a turbo set-up by the way so there no confusion and i know i will need injectors and a 255lph pump i have those already

 

ive always heard stock sleeves are reliable to about a bar (14.7 psi )... but thats only hearsay...

bump for some experienced answers.

 

I know you cant match PSI to whp because of different amount of flow at the same PSI for different turbo(big turbo VS lil turbo different psi to make same power) so can you say a block can only hold a certain psi?

 

you could easily make the same claim for internals, but its pretty universal that OE honda internals will reliably hold 10 psi... and like i said, its what ive heard, i have no experience with it.

do you have an answer, or are you just picking a fight?

 

ok smartasses how much hp will the stock sleeves hold is that better

 

depends on the tune!!!!!!!!!

 

neither of us are being smartasses.

Im not argueing, but i do think your wrong. I know a d16 max internals is 240whp safely. But 240whp can be gotten by a low psi on a BIG turbo, and high psi on a LITLLE turbo. Also, Honda's can hold more than 10psi(they can hold whatever psi it takes to make 240whp as stated above)

 

my friend had 265 on his stock d16 no problems

 

Stock sleeves can blow at 250whp or hold 600whp+, it all depends on the tune and the mechanical reliability of all related turbo components.

 

so i can make as much as i want as long as i have a good tune? doesnt sound right if that was possible everyone would have 100000000000000hp and a good tune