very true but you have to start somewhere ill do the swap for you for the ls lol

 

Thanks alot guys very good tips. Thanks for the site that should help alot. and that tip about tilting the trany side will help. Thanks alot for taking the time to give me some tips. It is going to be a little difficult putting one in but there are alot of write ups on it and hopefully I can get a few of my friends to stop by my place to help and I get some beer and pizza.

 

Oh and I have the crx si engine harness obd0 is that a good harness to use for the b16a1 swap? Also do you guys think I should get the B16a1 or a2. And there are alot of sites that sell engine swaps but there all around the same price what are some reliable good customer service sites that you guy recommend.

 

whats a good site to buy a swap???

Cause guys on here be tryin to play a dude

 

hmotorsonline.com

 

Yeah HMO is a great website. I have also used jazzpro parts before, the motors were in great shape. You should be able to the motor swap on your own. It isnt that hard. Just ake sure you do ample research before you start. Everybody has to start somewhere. My first motor I put in took me three days. now I can do it about 4-5 hours. That harness will work just fine, you are just going to have to run wires for vtec. If you are gong to have freinds come over and help you make sure they have plenty of experience. If it is your first swap get some ziplock baggies and label all the bolts you take off. It is a good idea to invest in a magnetic tray so you dont loose any bolts. BTW if you dont own a helms manual BUY ONE!!

 

For the helms manual do I buy one for the CRX or what? Thanks for all the advice.

 

YO good luck with this swap I just did my first swap Z6 out of an 88 crx going into an ef hatch Im learning had some help from a good friend who knows more than I do but he said getting the motors out is easy took 2.5 hours, getting it all in and wired right is the fun part I wish u luck never hurts to have some help tho...