nickscivicsi69

REVISED!!!!

So here she is, a long time in the making... This car got its start on TR Tampa Racing.. I picked her up about 4 1/2 years ago from a nobody who had her all wired up and done up WRONG. I have since taken the whole car apart and the motor was pulled and rebuilt, all wiring redone, timing done and maintenance done by "THE MAN" Neal Sutton and street tuned by John Vega.
I painted her myself, its not the cleanest job I've ever done LOL but i have put a lot of TLC into making her what she is now. She's my baby!!! 1993 Honda Civic Hatch CX model with a D16Z6 fully built bottom end and a slight clean touch to the head (tanked,new valves and valve job). I have included some pics of her from start of build to where she sits now NO LOWBALLING!!! NO TRADES only for CASH!!!
Im in no rush to sell, she's my DD with 165xxx on the body, the cluster reads over 200xxx but its from a dif car, an ex with a tach and 3100 miles and growing on the freshly built motor running 16lbs all day. She will need a secondary tune on a dyno, which Vega has already agreed to do.. ***AS OF 5/13*** I replaced the windshield and installed tokico blue shocks and skunk2 springs, New carpet with no holes and clutch side foot rest installed, new no name radio and speakers, Dx Trans came out Si Trans throwout bearing and new axles all went in... MY PRICE IS FIRM 4,500$


Interior
GSR cloth seats
acura mats (could use replacing)
center arm rest
rear cargo cover with speakers cut outs
Ex cluster reads 200xxx plus miles but actual miles are 165xxx on body 3100 and growing on motor
Newer Carpet and clutch side foot rest
New Autozone radio and speakers in doors


Exterior
painted red one stage paint not sanded or buffed 3 years ago
ek side skirts
OEM front lip
no name rear lip
CF spoon style mirrors
CF duckbill (no name)
OEM mud flaps all 4
New windshield and Moldings (No leaks)


Performance
D16Z6 full motor
**Just installed Si rebuilt trans By Neal Sutton**
**New OEM throwout bearing**
**New Axles (just done)**
Stage 2 clutch from tampa bay clutch supply 3 yrs old
Light weight flywheel
Micro polished and balanced crank
Adept Racing H-beam rods w/ floating pins and arp bolts (eagle's sister company)
Stock Honda bearings (all replaced)
SRP 75mm pistons
SRP Racing rings
Honda Head gasket
ARP studs
Honda water pump
Honda oil sending unit
all gaskets/rear and front main seal replaced
Head was tanked at (Scottys) valve job done (Neil Sutton)
New Honda timing belt
New tensioner and spring
New intake mani gasket
New throttle body gasket
T3/T4 .48 .62 turbo
3' downpipe
custom Intercooler piping by BigB Fab
Turbo XS wastegate 10lb spring
turbo XS boost controller set to 16lbs
AEM wide ban
no name boost gauge
greedy BOV
TUNED BY VEGA!


Stoping
all 4 wheel disk GSR in back
40/40 proportion valve
new 15/16 master bigger reservoir off ef ex model
all new pads
Tokico Blues
Skunk2 springs


There is so much more I can't remember it all, if you have any questions please inbox me pm me
Lots of pics check my link, Id like to have this sold to move forward with my next project.. Thank all for looking please keep it up ttt lol

The hatch pictures by nickscivicsi69 - Photobucket

Marcus350z

Bump for Nicko!

allmotorEGhatch

Any idea the hp its makin ? Jus curious , sounds like a really solid hatch ! Bump for you .

nickscivicsi69

It made just over 200hp on 12 lbs last time I had it on the dyno but it has the new turbo on it now and on 16lbs...

Thanks for the bump Marcus and thank you all motor

nickscivicsi69

bump keep the offers rolling peeps

nickscivicsi69

ttt

nickscivicsi69

Would like to sell by friday if possible please keep it ttt

nickscivicsi69

over 200 views not but 2 comments... TR disappoints me!

nickscivicsi69

Still available shed make a great Xmas present...

bigangel0514

Pm a number