Intellegence needed to answer question
lost u already???
Thread Starter
Join Date: Apr 2005
Posts: 836
Likes: 0
Received 0 Likes
on
0 Posts
Intellegence needed to answer question
Well I am doing some engine work on a b18 a1. I am taking my block to a shop and I dont know what would work on it. If I bore each cylinder out .020, are there any pistons from another honda engine that would fit that, or would it be easier to find matchin pistons if I bore it .030. I definatly want to get this done, so if anyone is experienced in this field, please let me know.
OEM honda pistons for b series are only offered in standard bore and .25mm oversized which is about .01". If you want or need to go to .020" then you will want to run forged aftermarket. .020" is the most I'd overbore on a boost engine and .040" is the biggest I'd go all motor unless you want to sleeve the block.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
FYI if you overbored it .020 then you would need to find 81.5mm pistons. Not hard to find but as KJ said oem were made in std(81mm) and oversized(81.25mm) only.
So if you wanted to run oem, you would have to overbore .010" (.25mm)
So if you wanted to run oem, you would have to overbore .010" (.25mm)
__________________
Last edited by Echo7847; 11-06-2005 at 03:42 PM.