I am going to be getting this thing tuned next month. I was just wondering what all of you think what the whp and tq are. My mods are k20a3 with revhard turbo:
revhard manifold
t3/t4
revhard intercooler and piping
440cc injectors
Kpro ecu
stock tranny

I hope for at LEAST 250whp.

 

you should definetley make that much power, especially with k-pro, what size DP, and exhaust are you running? that will be a key factor.

 

Sorry forgot about the rest.
Tanabe RM
3" dp
It still has the stock cat on, but I am getting a high flow unit soon.

 

i would say probably 230-240 whp....stock si's only make like 135 whp....so id say like another 85 hp is reasonable

 

how much boost... b/c my friend was seeing 240-250 at like 9psi on his gsr, i believe. GOOD LUCK! get that biotch tuned up and take er to the track too.

 

It'll be tuned for 10psi.
I was thinking of bringing some race gas(unleaded), and have them do a tune for that also.
I am running real rich right now, and my duty cycle is a little high. Hopefully, tuning will bring it down a little.

 

I did not measure it before it went in, and revhard will not give those specs out even if you have the kit(Ive tried calling). I guess they have that locked tight.
Redline at 7500.

 

sounds purty good, but remember 250fwhp is nothin when its not in the good power band...ie 6-8xxx rpm. that was my buddies problem, when he finally pumped up the boost he was makin over 400whp on the gsr but not until like 6500 and up, which does nothing for you when you think about it, b/c ur shifting at 8-9000.