so i got black housing angel halo projector's the other day (thanks mark) and i went to put em in and i didn't know exactly how to wire the halo's... so i get out the ol haynes manual wiring diagram and i find black is ground (so white to black) and black/red is for parking lights (so red to black/red) right? didn't work... then i try a couple other combo's nothing is working... argh... so i say screw it i'll ask somebody on here and i'll get it workin... so i rewire my blinkers the original way they were, same problems-no blinkers, just hazards; no parking lights, at all; and of course the halo's are still out. the reg lights and the brights work fine, esp since i replaced em all with new ones (they're great) does anybody know what to do? the haynes book says to look at fuse #19, which one is that? any help would be greatly appreciated... sorry this is so long...

 

look under your dash where your fusebox is.

 

i have halo's on my 4dr as well....we wired them into the turn signals/parking lot. spliced them right in....

 

spectacle- which wire to which wire? did you do red from halo to red/black on turn signal and white from halo to black on turn signal?

sloteg- i looked, but it isn't marked as turn signal fuse and there's no number 19 or anything... still don't know what to do...

but thanks you guys

 

Wire them to your tach.....the faster you go, the brighter they get

 

buahahahhahahahhaha!!!!!!!!!!!!!!! say i won't!!!!