need my bottom end rebuilded on ls
need my bottom end rebuilded on ls
i need it done can anyone do it and for how much i have a rod knocking and need it fixed asap i can get all the parts at holesale. also how hard and what tools do i need to do it myself. i know the basic of a rebuild but not sure about it all. so if some one can help me out please thanks
__________________
Aim: Hondacrxls
Aim: Hondacrxls
are u gonna do an oem rebuild or aftermarket?
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
Originally posted by sl0 t3g
get a factory honda service manual, it tells you how to do an overhaul and what needs to be done.
get a factory honda service manual, it tells you how to do an overhaul and what needs to be done.
__________________
Aim: Hondacrxls
Aim: Hondacrxls
It is called a helms manual
helmsinc.com
helmsinc.com
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
if you just have a rod knock get some new bearings and buy mtber's LS crank, swap bearings and crank and you should be good to go. you can get a chiltons or haynes from your library. it will have all the info you will need.