so a new clutch is most likely gonna slip before the break in period, but after the break in period it should go away right

 

Mine never slipped, but I also took it easy and didn't beat on it for 500 miles.

 

o cool

 

You should be fine if you take it easy for a week or two. I did the same thing with my Mx-6 some years ago. Gave it a couple days of easy riding and it was all good. Did you have your flywheel resurfaced before hand?

 

found out the clutch fork isnt hooked on both ears. only one

 

I HIGHLY doubt it should be slipping at all...... that doesn't make sense.

 

it is slipping. badly, im gonna take off tranny, see if the pressure plate is bent or if the fork is bent, possibly swap throw out bearings

 

how much pedal free play do you have? broken in or not it should not slip under normal driving.

 

something is messed up internal bc the clutch fork looks crooked, and the stock clutch pin wuldnt work