Thinking about selling the slobra :-(
Well venomiss I will show ya how fast my car is on slicks and then you will see that i wont be much slower than lil daves "old" set up (before it broke) and yeah i may be still in the 13's but lets not talk about when we were coming back from ATL what happened from a stop? oh and how i had 2 race you from your roll inorder for you 2 beat me.but hey thats old news right
becouse i guess i owe ya a race now don't I.oh and yeah a stock cobra did 12.9 with 28x rwhp so what i was only a few tenths away with only 228Rwhp.so next time we meat your done
I'm gonna put a fork in ya becouse your done like dinna.oh well even if ya do beat me motor for motor i have a blue bottle that says you aint shit
__________________

Yeah it's broken
-Cobra block
-Cobra crank
-Diamond pistons
-Eagle rods
-NOSzle Kit
-Bottle Heater
-QA1 K-Member
-D&D Tubular A-arms
-D&D Coil overs
-1/2' Intake spacer
-Windage tray
-80MM C&L
-K&N Filter
-FR Aluminum drive shaft
-Steeda G-trac bar
-Kenny Brown sub frames
-UPR shifter
-Spec clutch
-Spec Alumn Flywheel
-Steeda Clutch quadrant
-Steeda fire wall adj
-4:10 gear
-Mac upper adj control arms
-Mac Lower control arms
-Mac T/A girdle
-Steeda quad shocks
-Hooker long tubes
-DR.Gas X-pipe
Yeah it's broken-Cobra block
-Cobra crank
-Diamond pistons
-Eagle rods
-NOSzle Kit
-Bottle Heater
-QA1 K-Member
-D&D Tubular A-arms
-D&D Coil overs
-1/2' Intake spacer
-Windage tray
-80MM C&L
-K&N Filter
-FR Aluminum drive shaft
-Steeda G-trac bar
-Kenny Brown sub frames
-UPR shifter
-Spec clutch
-Spec Alumn Flywheel
-Steeda Clutch quadrant
-Steeda fire wall adj
-4:10 gear
-Mac upper adj control arms
-Mac Lower control arms
-Mac T/A girdle
-Steeda quad shocks
-Hooker long tubes
-DR.Gas X-pipe
Guest
Posts: n/a
Originally posted by "Modular Matt"
Well venomiss I will show ya how fast my car is on slicks and then you will see that i wont be much slower than lil daves "old" set up (before it broke) and yeah i may be still in the 13's but lets not talk about when we were coming back from ATL what happened from a stop? oh and how i had 2 race you from your roll inorder for you 2 beat me.but hey thats old news right
becouse i guess i owe ya a race now don't I.oh and yeah a stock cobra did 12.9 with 28x rwhp so what i was only a few tenths away with only 228Rwhp.so next time we meat your done
I'm gonna put a fork in ya becouse your done like dinna.oh well even if ya do beat me motor for motor i have a blue bottle that says you aint shit
Well venomiss I will show ya how fast my car is on slicks and then you will see that i wont be much slower than lil daves "old" set up (before it broke) and yeah i may be still in the 13's but lets not talk about when we were coming back from ATL what happened from a stop? oh and how i had 2 race you from your roll inorder for you 2 beat me.but hey thats old news right
LOL.....Pretty funny Mateo. "I won't be much slower than Dave's old set up"....Right
I'd like to see that. Oh, and when we were coming back from ATL, we raced from a roll and from stops. Who came out next to you on FACTORY STREET TIRES, not drag radials. That's right, don't cry about it. Especially since it takes you bolt ons and spray to try to beat us. Face it Matt, you are more than a few tenths behind us. Mari ran those times in the heat of the day in mid July, you ran in the cool of early March. You won't run does times again, in the heat. So, you get your car running, get the hood painted, get some nittos and get her done!!!! We are ready to race, we've been out at the spots and we haven't seen you there. Just remember, when we race, you are always gonna be a "few tenths" behind.....
Have a splendid day.
Originally posted by "BoostedY2KGT"
LOL.....Pretty funny Mateo. "I won't be much slower than Dave's old set up"....Right
I'd like to see that. Oh, and when we were coming back from ATL, we raced from a roll and from stops. Who came out next to you on FACTORY STREET TIRES, not drag radials. That's right, don't cry about it. Especially since it takes you bolt ons and spray to try to beat us. Face it Matt, you are more than a few tenths behind us. Mari ran those times in the heat of the day in mid July, you ran in the cool of early March. You won't run does times again, in the heat.
So, you get your car running, get the hood painted, get some nittos and get her done!!!! We are ready to race, we've been out at the spots and we haven't seen you there. Just remember, when we race, you are always gonna be a "few tenths" behind.....
Have a splendid day.
LOL.....Pretty funny Mateo. "I won't be much slower than Dave's old set up"....Right
I'd like to see that. Oh, and when we were coming back from ATL, we raced from a roll and from stops. Who came out next to you on FACTORY STREET TIRES, not drag radials. That's right, don't cry about it. Especially since it takes you bolt ons and spray to try to beat us. Face it Matt, you are more than a few tenths behind us. Mari ran those times in the heat of the day in mid July, you ran in the cool of early March. You won't run does times again, in the heat. So, you get your car running, get the hood painted, get some nittos and get her done!!!! We are ready to race, we've been out at the spots and we haven't seen you there. Just remember, when we race, you are always gonna be a "few tenths" behind.....
Have a splendid day.
Damn I never thought my thread would grow into this. Oh well. I can't afford to keep my Cobra so I'm gonna sell it. I would like to keep it but I have other priorities right now and I could use those car payments for othere things. As much as I hate to do this it would best for me to get rid of my car
__________________
-Jomar-
-Jomar-
Guest
Posts: n/a
We have been making new topics inside of other topics a lot lately. I will split this one up so we can put this topic back on track and that is to help you sell the Cobra. 
Here is the new Modular vs. 5.0 Thread
(Everyone Play Nice Please)
https://www.tamparacing.com/phpBB2/viewtopic.php?p=305936#305936

Here is the new Modular vs. 5.0 Thread
(Everyone Play Nice Please)
https://www.tamparacing.com/phpBB2/viewtopic.php?p=305936#305936


