ok i have a 93 mustang with a 351 block with 302 heads and a carb....and i have an 88 mustang thats efi bone stock....we're pulling the swap out the 93 and putting it in the 88...i wanted to know if the intake manifold from the 88 will fit on the 93's swap...we want to keep it fuel injected....

 

lower intake manifold will not fit 302 to 351.

 

ok....then what do i need to get to make this motor fit in the 88 and keep efi.....

 

/\ any aftermarket manifold for an EFI 5.8/351

 

< this with a 90 degree elbow, it's a parker funnel web , you can buy the knockoff ones for 150.00 there the exact same cast as the actual Parker one, and they outflow the victor jr's and the trick flows, just buy one,drill the spots for the injectors,buy a 90 degree elbow and be happy.

 

thats a LOT of intake for a stock 351 lol

 

yeah it shouldn't be to bad, I know they outflow the victors and trick flows,plus theres always room for improvement.

 

eBay Motors: 86-93 Ford Mustang 5.8 351W TYPHOON POLISHED Intake Kit (item 250414612088 end time May-04-09 07:42:16 PDT)

 

Yeah sorry about the bad information, I misread the 351W part,Parker dosn't make the funnel web for 351w, the only way to run the Parker on a 351w is by using cleveland heads, sorry.

 

thanks for the info...exactly what i needed to know...