I just picked up an 85 Roller. I know the 85 302's were roller 302's with carbs up top. Is there any info out there to retrofit an 89-93 EFI mass air harness into one of these cars so I can use my Victor 5.0 intake??? I don't want to go the carb'd route unless absolutely necessary.

 

all you need is a harness and ecm.

 

plus one......remember you need to swap the dash and column.

 

you could also use the 86 speed density harness and do the mass air conversion on that harness.that way you could keep your 85 dash and guages.

 

<~~~taking notes

 

what a fart smeller, great idea.

 

Know anyone that has done this... ive heard bad ju ju adding a mass air kit to an 86 speed density harness. Isn't the Painless EFI swap harness a stand alone harness? I am trying to find the harness they use in the old mustangs to swap in a mass air 302 motor.

 

i have a harness and ecu out of an 89 for ya

i also need a victor intake.......and have an extra cobra intake sittin here i dont need.......

 

i don't know anyone that has did this personally,but i have heard and saw people do this in tech pages of other web sites in the past.i think i have seen a few in MMFF mag and 5.0.

 

thanks for the info guys....