Need Help!! with welds
lives in a glass house
Joined: Jan 2005
Posts: 5,451
Likes: 0
Originally Posted by evocrazy1
well bolted up a set of 15 x 8 with a 6.50 back spacing, and had 265 50 15 tires and no rub, but i'm goin a different direction, but thanks for all the info, i let my buddy know cuz he just did the lincoln swap, i'm doing 17 chrome ponys with eiback sportlines
Thread Starter
Banned
Joined: Aug 2003
Posts: 1,722
Likes: 0
i know shawn, but there are to many fucking hatches up here on welds, and i just bought a saleen ground effect kit from cervini's, so i'm going for the show scene with power that i can use at the track, what i really want are stern wheels that were used on 91-93 saleens but they cant be found, and their to damn expensive
`
`
__________________
ASKED TO BE BANNED
ASKED TO BE BANNED
lives in a glass house
Joined: Jan 2005
Posts: 5,451
Likes: 0
Originally Posted by evocrazy1
i know shawn, but there are to many fucking hatches up here on welds, and i just bought a saleen ground effect kit from cervini's, so i'm going for the show scene with power that i can use at the track, what i really want are stern wheels that were used on 91-93 saleens but they cant be found, and their to damn expensive
`
`
Regardless, now you know what size wheel you need.
POTENTIALLY FAST
Joined: Mar 2005
Posts: 1,618
Likes: 0
or try the old baseball bat trick to roll your fenders and give you more clearance and/or lose the tailpipes and go with dumps.............I'm assuming you already got rid of the quad shocks of course.............
you can also use a ball peen hammer and a torch and "massage" the inner fender well
I've done that and got a 15x10 with a 6.5 bs on a 90 hatch before
you can also use a ball peen hammer and a torch and "massage" the inner fender well
I've done that and got a 15x10 with a 6.5 bs on a 90 hatch before
Thread Starter
Banned
Joined: Aug 2003
Posts: 1,722
Likes: 0
i already did the ball pen massaging, but a 15 x 10 will fit but the tire wont, and i dont ant to be driving on drs in snow, and i just had the car lowered with h&r race springs, but i bought welds for the rear to use at the track
so i don't kill my bfg kdws, i didnt think you could run anything bigger than a 245 up front on a fox
so i don't kill my bfg kdws, i didnt think you could run anything bigger than a 245 up front on a fox
__________________
ASKED TO BE BANNED
ASKED TO BE BANNED
Last edited by evocrazy1; Jun 30, 2005 at 07:20 AM.
