I don't want pressure buildup in my pan so I will have to tap the valve cover.

 

http://store.summitracing.com/defaul...=egnsearch.asp

 

my only concern is pulling oil into the intake under hard vaccum. May have to run it to a breather tank.......... whats your opinion on that?

 

Vac will not increase above what you have at idle. Its not generally the vac that ingests the oil as it is the crankcase pressure that blows it up into the intake.

Im, all about efi now, but if I remember correctly - back in my carb days, I just ran a pcv valve to one valve cover and put a breather in the other. I could be totally off on this, so nobody roast me

 

yeah..thats what i remember...pcv with hose going to carb base and breather in the other side.

 

Sounds like a plan

 

Exactly what Jeff said.