Bad clutch or what?
Thread Starter
Registered User
Joined: May 2003
Posts: 718
Likes: 0
Bad clutch or what?
Hey guys my 92 coup[e is doing something strange latley?I am not sure if its all in my head or what,But anyways here it goes...Latley when i put it in first and start releasing the cluth im getting a big vibration until i let of the clutch .It only does it in first,and if i give it enough gas it wont do it?I know you may be thinking "well u probably dont know how to drive" but thats not the case.I have had this car for three years and i have never noticed this before.And to fill you in i did a gear swap(373) and aluminum driveshaft about 2 months ago by a good buddy of mine. could it be due to this?I dont think it is the clutch because it feels like it has alot of meat left on it.Well let me know.Its not a major issue its just kind of annoying.Thanks in advance guys!
Brandon
Brandon
The little 5.0 that could
Joined: Apr 2003
Posts: 13,275
Likes: 0
Mine did something similar, does it if I come off the line regular driving with the rpms real low. Started doing it a couple years ago, I've since replaced the u joints on the driveshaft, replaced the tranny, and replaced the clutch... still does it. I guess it could have something to do with the clutch quadrant, that's all I havn't replaced.
__________________
-Vince
-Vince
Don't be so angry
Joined: Mar 2004
Posts: 986
Likes: 0
Originally Posted by ls1killer
Sounds like clutch chatter.
John
__________________
John
1992 Mustang LX 5.0-Powerdyne BD-11A, 3.73's, FRPP clutch, chrome Ponies, Mac headers, Aeromotive regulator, MSD 6A, MSD BTM, FRPP 42# injectors, Pro-Flow Air Optimizer, Trick Flow Track Heat intake, Edelbrock 75MM TB, AFM Power Pipe
John
1992 Mustang LX 5.0-Powerdyne BD-11A, 3.73's, FRPP clutch, chrome Ponies, Mac headers, Aeromotive regulator, MSD 6A, MSD BTM, FRPP 42# injectors, Pro-Flow Air Optimizer, Trick Flow Track Heat intake, Edelbrock 75MM TB, AFM Power Pipe
Don't be so angry
Joined: Mar 2004
Posts: 986
Likes: 0
Originally Posted by TheShow50h
Mine did something similar, does it if I come off the line regular driving with the rpms real low. Started doing it a couple years ago, I've since replaced the u joints on the driveshaft, replaced the tranny, and replaced the clutch... still does it. I guess it could have something to do with the clutch quadrant, that's all I havn't replaced.
John
__________________
John
1992 Mustang LX 5.0-Powerdyne BD-11A, 3.73's, FRPP clutch, chrome Ponies, Mac headers, Aeromotive regulator, MSD 6A, MSD BTM, FRPP 42# injectors, Pro-Flow Air Optimizer, Trick Flow Track Heat intake, Edelbrock 75MM TB, AFM Power Pipe
John
1992 Mustang LX 5.0-Powerdyne BD-11A, 3.73's, FRPP clutch, chrome Ponies, Mac headers, Aeromotive regulator, MSD 6A, MSD BTM, FRPP 42# injectors, Pro-Flow Air Optimizer, Trick Flow Track Heat intake, Edelbrock 75MM TB, AFM Power Pipe
How Fast???
Joined: May 2004
Posts: 445
Likes: 0
sound like the clutch is off balance or the pressure plate is warped
__________________
"There are some that like it stroked and others like it blown"
"I like it stroked and blown at the same time!!!"
-RYAN-
AIM- rs20r03
TO EMAIL ME CLICK HERE
"There are some that like it stroked and others like it blown"
"I like it stroked and blown at the same time!!!"
-RYAN-
AIM- rs20r03
TO EMAIL ME CLICK HERE
Thread
Thread Starter
Forum
Replies
Last Post
Matt Vassallo
Nissan/Infiniti Tech
41
Feb 22, 2005 07:58 AM
BlackZ28
GM Tech - Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn Tech
9
Sep 19, 2003 04:57 PM
