P0300 code and engine misfies

Reply Subscribe

Thread Tools

Feb 26, 2019 | 10:34 PM

#1 (permalink)

senor honda

Thread Starter

Registered

Joined: May 2005

Posts: 104,808

Likes: 21

P0300 code and engine misfies

https://www.chargerforums.com/forums...1&d=1551252392

The old 3.5 V6 will run like that when the cam or crank position sensor is going bad (had that engine in my 2001 Chrysler 300M). Also, they do not like aftermarket cam sensors- eats them like candy (I would always keep a spare in the glove box) Also, many of the the cam sensors have a paper spacer attached to the end for setting clearance during installation--don't peel it off like I did on my 1st replacement sensor!

__________________
Here is the listings of ALL New Mexico Car Events Including Route 66 Anniversary
https://www.tamparacing.com/forums/t...ar-events.html
Top Car Club Meetings? Click a city
Got a video? Email it to Bobfixesitup@yahoo.com
________________________________________________

Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html
Keystone picture gallery is here:
https://carstoshow.com/eventdetails.aspx?eventid=93202

Veterans and Friends on First Saturday...Some pictures....
https://carstoshow.com/registerevent...eventid=102331

Port Richey Rod Run at Coast Buick GMC
https://carstoshow.com/registerevent.aspx?eventid=99114

50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...acing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
50's Diner pictures are here: https://carstoshow.com/eventdetails.aspx?eventid=93194

All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html

Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/

Feb 26, 2019 | 10:34 PM

#2 (permalink)

senor honda

Thread Starter

Registered

Joined: May 2005

Posts: 104,808

Likes: 21

P0300 Multiple Cylinder Misfire will be logged when there are multiple cylinders misfiring or the PCM can not determine the specific cylinder that is misfiring. Are any other codes logged?

Is the car pointing uphill when it's parked and stutters to start up?

Mar 3, 2019 | 05:57 PM

#3 (permalink)

senor honda

Thread Starter

Registered

Joined: May 2005

Posts: 104,808

Likes: 21

Ok, so after finding no solutions to the problem I decided to start back with the wiring harness grounds. There is a ground eyelet on the harness that goes in one of the transmission to engine bolts just above the starter. It appears my bottom side man missed this during engine installation and this was the problem. After installing this ground and resetting the codes I started the engine and all codes cleared except four O2 sensor codes. Ended up swapping out all sensors with zero effect and then was told I probably fried the PCM because of the missing ground wire. I received my new/used re-flashed "Plug and Play" PCM Friday and installed it this morning, cleared a long list of stored codes and everything is working as it's supposed to work.That was a tremendous amount of work, worry, and money for a missed ground.To all that assisted me in this I really do thank you for your help and suggestions.