Bry

Motor Only...Ill have mine back next month

chris
aka...hospwr

 

Chris
What kind of times are you looking for when you put it back together? If your deep in the 10s I dont want any but if your in the mid 11s I would be happy to take a try at it. All I have to loose is my pride right?

Wouldnt be the first Mustang to beat me. I got beat by some mid 80s shit box looking Rustang a while back by looking at it you would of thought it might run 16s on a good day but good lord when he hammered it I got to see nothing but taillights. Not something that happens everyday but it was a sleeper and then some.



------------------

tampabay.dsm.org/members/jpeterso/
tampabay.dsm.org/projects/jpeterso/
V8 SLAYR

 

bry i dropped from a 14.5 @ 95mph to 12.86 @ 107mph with no turbo no supercharger and definatly no NOS. not exactly 2 sec but close

 

If we run motor for motor I expect mid 11s. She run a best of 11.814 at 115.9 with a 1.606 60ft.

I have no secrects below are the current mods.

Bennett Prepared 393 stroker


SHORT BLOCK …

SVO Sportsman Block
SCAT 3.85 Cast Steel Crankshaft-Balanced
Eagle Connecting Rods
Ross Pistons and Pins
Speed Pro Rings and Clevite Bearings
Custom Lunati Hydraulic Roller Camshaft
FM 6268-A302 Timing Chain and ARP Bolt
ATI Harmonic Balancer and ARP Bolt
Canton 7qt Oil Pan and Hi Vol Oil Pump & Shaft

TOP HALF …

ARP Head Bolts and FELPRO Head Gaskets
Bennett Stage 2 Canfield Cylinder Heads
HYD Roller Lifters and Hold Down Kit
Crane Roller Rockers and Comp Pushrods
GT-40 lower……Hogan Sheet Metal Upper
36lb Injectors
80mm TB
83mm Pro-M Mass Air
Taylor 10mm Pro_Wires

Misc Engine…

Pro-M Improvement Harness
MSD Billett Distributor
MSD 6
MSD Retatrd Timing Module
Griffin Alum Radiator
Flaming River…Manual rack
CSI Electric Water Pump
Braided lines throughout


Cartech Stage II fuel system w/twin 450 pumps


Page 2

Custom Fabricated 1 7/8 Long Tube Headers w/ 3 Collectors
Custom Fabricated H-Pipe
3 FlowMaster (3) Chambers Mufflers

McCleoud Clutch w/ Iron Disk
Tremec TKO
Lakewood Scattershield
Pro 5.0 Shifter
FMS Allum Driveshaft

8.8 Rearend
31 Spline Mosler Axles
Auburn Pro Replaced with a spool after breaking the 2nd one
TA Cover
4:10 Gears
3” studs

Southside Lift Bars
Frame Connectors
Wild Rides…Battle Boxes
Eibach Drag springs w/ Air bag
Lakewood Drag Shocks 90/10® 50/50(f)

Interior

8 PT. Custom Cage w/ Swingouts
Jamex Monaco Seats
New Black ACC carpet
Simpson 5pt Harness
Autometer Guages ..FuelWater and Oil Temp Oil pressure and Nitrous Pressure
Blk and Clay Red Color Scheme

Exterior

Custom Ram Air Hood made by Keystone
Triple Blk w/ Gold Pearl Paint that fades front to rear on the hood
And back to front on the sides..Also wipers and mirrors have gold pearl
Gold and Clay Red Pinstipping done by Norm T
Back window is Sandblasted w/ the Blue Oval Emblem
15” Super Shinoda Spoiler

Wheels

15X4 Weld Draglites
15X10 Weld Draglites
BFG Drag Radials 325x15x50

ET Drags 28.6x10.5x15 (track)

Remember I only race at the track..

Chris
aka hospwr

 

Chris
Sounds like it could be a very close race if Spec-R ever sends me back some mail with the price of the slicks and rims I want we might be able to do this in the near future.

If anyone else has a good source for M/H race slicks and Bogart wheels let me know I could use the hookup. Thanks.




------------------

tampabay.dsm.org/members/jpeterso/
tampabay.dsm.org/projects/jpeterso/
V8 SLAYR

 

Damn chris thats a hell of a mod list. Sounds like a full drag car. Will race but you got to be on street tires no drag radailsno slicks... same goes for me. My guess is you wont go anywhere for a while giving me a head start...HEHEHEHE

 

Dot approved huhh....Remember only at the track.

Chris

 

If you live in Tampa you must have seen this car.