20v 1.8t mk2 swap speedo/tach question
Thread Starter
Gangsta What
Joined: Oct 2002
Posts: 602
Likes: 0
20v 1.8t mk2 swap speedo/tach question
im in the process of doing a 1.8t 20 valve swap into a mk2 gti. im going to use mega squirt. i plan on using the mk2 tranny (for now). i want to retain the mk2 cluster so i was curious whaat way to go about adapting the speedo/tach from the mk2 with the 1.8t motor.
i havent started the actual swap yet as im waiting for my buddy to pull what all he wants off the loaner car. Just doing all my research and gathering parts as im not really familier with 1.8t.
i havent started the actual swap yet as im waiting for my buddy to pull what all he wants off the loaner car. Just doing all my research and gathering parts as im not really familier with 1.8t.
Last edited by 95Ride; Jan 19, 2012 at 08:14 PM.
Resident VW enthusiast
Joined: Mar 2002
Posts: 161
Likes: 0
Fourtitude.com - mk2 cluster with 1.8t swap questions
looks like a corrado g60 one may work.
might be easier to swap in a 1.8t drive by cable found in an earlier 97-99 passat/a4 instead of the later drive by wire ones
looks like a corrado g60 one may work.
might be easier to swap in a 1.8t drive by cable found in an earlier 97-99 passat/a4 instead of the later drive by wire ones
Last edited by 84Roc; Jan 20, 2012 at 07:21 PM.
Registered User
Joined: Jan 2004
Posts: 388
Likes: 0
if your keeping the tranny from your car and cluster from you car then your speedo will work just fine as its mechanical
. then just need to find a signal from megasquirt to send to your tach.
. then just need to find a signal from megasquirt to send to your tach.
Thread
Thread Starter
Forum
Replies
Last Post
