HELP!!!! No Throttle Response ....
Thread Starter
pfft.....
Joined: Jan 2001
Posts: 5,463
Likes: 0
HELP!!!! No Throttle Response ....
okay heres my issue...
i have a 2002 VW GTI with the motor, trans, ecu from a 2004.5 Jetta GLI. Its got an APR Stage 3+ BT kit. There are other mods but nothing that pertains to this issue.
the car ran fine the other day no problems what so ever. i goto get into the car last night it starts fine but the RPM's hold at 1200 rather then the normal 800. When i press the gas there is no response at all it acts like im not even pressing on the pedal at all.
scanned with vag-com and heres what i got.
VAG-COM Version: Release 409.1-S
Chassis Type: 1J - VW G/J/B Mk4
Scan: 01,02,03,08,16,15,17,19,22,35,46,56
-------------------------------------------------------------------------------
Address 01: Engine
Controller: 06A 906 032 HS
Component: 1.8L R4/5VT G07 0008
Coding: 07500
Shop #: WSC 00000
9BWDE61J924000562 VWZ7Z0A3896438
4 Faults Found:
18039 - Accelerator Position Sensor (G79): Signal too High
P1631 - 35-00 - -
18042 - Accelerator Position Sensor 2 (G185): Signal too High
P1634 - 35-00 - -
16487 - Mass Air Flow Sensor (G70): Signal too High
P0103 - 35-10 - - - Intermittent
17524 - Oxygen (Lambda) Sensor Heating: B1 S1: Open Circuit
P1116 - 35-10 - - - Intermittent
Readiness: 0110 1101
-------------------------------------------------------------------------------
Address 03: ABS Brakes
Controller: 1C0 907 379 D
Component: ASR FRONT MK60 0103
Coding: 0021505
Shop #: WSC 00000
1 Fault Found:
01314 - Engine Control Module
013 - Check DTC Memory - Intermittent
-------------------------------------------------------------------------------
Skipping Address 15-Airbags
-------------------------------------------------------------------------------
Address 17: Instruments
Controller: 1J0 920 906 J
Component: KOMBI+WEGFAHRSP VDO V02
Coding: 07232
Shop #: WSC 00000
9BWDE61J924000562 VWZ7Z0A3896438
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway
Controller: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 00000
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv.
Controller: 1C0 959 799 C
Component: 1J Komfortgerát HLO 0003
Coding: 00064
Shop #: WSC 00000
1 Fault Found:
01179 - Incorrect Key Programming
35-00 - -
End --------------------------------------------------------------------------------------------------
bad pedal assembly?
anyone got a clue?
i have a 2002 VW GTI with the motor, trans, ecu from a 2004.5 Jetta GLI. Its got an APR Stage 3+ BT kit. There are other mods but nothing that pertains to this issue.
the car ran fine the other day no problems what so ever. i goto get into the car last night it starts fine but the RPM's hold at 1200 rather then the normal 800. When i press the gas there is no response at all it acts like im not even pressing on the pedal at all.
scanned with vag-com and heres what i got.
Originally Posted by VAG-COM
VAG-COM Version: Release 409.1-S
Chassis Type: 1J - VW G/J/B Mk4
Scan: 01,02,03,08,16,15,17,19,22,35,46,56
-------------------------------------------------------------------------------
Address 01: Engine
Controller: 06A 906 032 HS
Component: 1.8L R4/5VT G07 0008
Coding: 07500
Shop #: WSC 00000
9BWDE61J924000562 VWZ7Z0A3896438
4 Faults Found:
18039 - Accelerator Position Sensor (G79): Signal too High
P1631 - 35-00 - -
18042 - Accelerator Position Sensor 2 (G185): Signal too High
P1634 - 35-00 - -
16487 - Mass Air Flow Sensor (G70): Signal too High
P0103 - 35-10 - - - Intermittent
17524 - Oxygen (Lambda) Sensor Heating: B1 S1: Open Circuit
P1116 - 35-10 - - - Intermittent
Readiness: 0110 1101
-------------------------------------------------------------------------------
Address 03: ABS Brakes
Controller: 1C0 907 379 D
Component: ASR FRONT MK60 0103
Coding: 0021505
Shop #: WSC 00000
1 Fault Found:
01314 - Engine Control Module
013 - Check DTC Memory - Intermittent
-------------------------------------------------------------------------------
Skipping Address 15-Airbags
-------------------------------------------------------------------------------
Address 17: Instruments
Controller: 1J0 920 906 J
Component: KOMBI+WEGFAHRSP VDO V02
Coding: 07232
Shop #: WSC 00000
9BWDE61J924000562 VWZ7Z0A3896438
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway
Controller: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 00000
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv.
Controller: 1C0 959 799 C
Component: 1J Komfortgerát HLO 0003
Coding: 00064
Shop #: WSC 00000
1 Fault Found:
01179 - Incorrect Key Programming
35-00 - -
End --------------------------------------------------------------------------------------------------
bad pedal assembly?
anyone got a clue?
Registered User
Joined: Apr 2008
Posts: 219
Likes: 0
check the connections around the throttle body and see that all the plugs are in place, maybe it was loose enough to fall off by itself.
__________________
98 Audi A4 built 1.9 gt30r SOLD
99 Audi A4 1.8t SOLD
00 Audi Silver S4 stg 2 SOLD
97 6 bolt swap 2.3 stroker 2g eclipse GSX SOLD
00 Audi Santorin S4 stg 2
04 Chevy Trailblazer DD
98 Audi A4 built 1.9 gt30r SOLD
99 Audi A4 1.8t SOLD
00 Audi Silver S4 stg 2 SOLD
97 6 bolt swap 2.3 stroker 2g eclipse GSX SOLD
00 Audi Santorin S4 stg 2
04 Chevy Trailblazer DD
Thread Starter
pfft.....
Joined: Jan 2001
Posts: 5,463
Likes: 0
thats what i thought too... so i removed the TB this morning cleaned it and put it back in.
did a throttle body alignment too and i could hear it clicking like it normally does so i'm assuming it worked correctly.
