22R questions
Registered User
Thread Starter
Join Date: Jul 2004
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
22R questions
Anyone in here a big fan of the 22r engine, or knows a lot about them? If you do, i got some questions...
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
Last edited by 89crxsir; 04-20-2008 at 06:55 AM.
Registered User
Thread Starter
Join Date: Jul 2004
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
i'm doing timing chain, water pump, head gasket. while i have the engine 1/2 tore down, i want to get rid of the smog stuff. I can't find anything on line about it and Lc Engineering have a egr block off kit http://www.toyotacatalog.net/M1WebGe...4-D715971CF42D SO i'm guessing one part goes over the egr in the intake and the other one goes over the exhust manifold, but where does the the last one go?
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
Last edited by 89crxsir; 04-20-2008 at 07:02 AM.
TR Balla Donor Supreme
Join Date: Oct 2007
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
the top left one goes on the back of the intake manifold. the Center goes on the passenger back side of the head. the right one is the block off for the Carb`d manifolds.
You may also want to get http://www.toyotacatalog.net/M1WebGe...6-23409DA05DC0 to block off the crossover on the back of the head.
31.85 for the 3 plates that you need... or you can just buy the kit you linked to and leave the stock crossover on.
You may also want to get http://www.toyotacatalog.net/M1WebGe...6-23409DA05DC0 to block off the crossover on the back of the head.
31.85 for the 3 plates that you need... or you can just buy the kit you linked to and leave the stock crossover on.
Registered User
Thread Starter
Join Date: Jul 2004
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
TR Balla Donor Supreme
Join Date: Oct 2007
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
^ that hole is for your stock O2 sensor.
http://www.toyotacatalog.net/M1WebGe...5-70EC574B6B02
thats the block off for it
http://www.toyotacatalog.net/M1WebGe...5-70EC574B6B02
thats the block off for it
Registered User
Thread Starter
Join Date: Jul 2004
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
ok, thats where the pipe goes to the egr valve.
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
Registered User
Thread Starter
Join Date: Jul 2004
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
yea.... i'm the carb version.. so i don't have an o2. check your pm..
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
