XAT Dyno Day Results
Hi Hi Hi?
Joined: May 2003
Posts: 5,184
Likes: 0
Originally Posted by MR2driver
I am running a Gen 3 engine, so none of your theories apply. Thanks for the information, though. The only thought that I will address is of the ceramic compressor wheel. The only time a wheel will break up is when the turbo has bad seals and is thrown out of balance. I maintain mine, so that will not be an issue for me. I also only run high boost when I am racing. Daily use only sees 10psi.
Rice Raper
Joined: Mar 2005
Posts: 47
Likes: 0
Originally Posted by MR2driver
I am running a Gen 3 engine, so none of your theories apply. Thanks for the information, though. The only thought that I will address is of the ceramic compressor wheel. The only time a wheel will break up is when the turbo has bad seals and is thrown out of balance. I maintain mine, so that will not be an issue for me. I also only run high boost when I am racing. Daily use only sees 10psi.
haha yea your 20b can handle 18psi when maintained properly. You wont have much trouble hitting the numbers you want with that motor. I know a guy in Miami who made 300whp on 18psi on that motor. Only mod done was EMS and it was tuned shitty at that.
__________________
Thomas
90 Celica 3sgte swap (57 trim ct)
90 MK3 Supra Turbo *in ICU*
Thomas
90 Celica 3sgte swap (57 trim ct)
90 MK3 Supra Turbo *in ICU*
SOOFIERCE
Joined: Oct 2004
Posts: 1,329
Likes: 0
Searching for 300rwhp
After dyno tuning at XAT, this 2nd Gen 3SGTE put out 235rwhp @ 15psi.
For some reason, I don't believe this is a good start with all these new parts I have. Am I missing something here? Am I on the right track to hit 300rwhp or does this MR2 I have simply doesn't have it in her?
Tubular Exhaust manifold (Ebay)
CT20B Fresh rebuild
3" Downpipe (Ebay)
2.75" to 3" JDM full exhaust (Single out)
Greddy Intake filter
NGK Copper plugs
1.5mm metal headgasket
3SGTE Toyota Engine rebuild
Stock IC
Stock new clutch
Profec B
SAFC II
Aeromotive FPR
Comments?
PEACE-
For some reason, I don't believe this is a good start with all these new parts I have. Am I missing something here? Am I on the right track to hit 300rwhp or does this MR2 I have simply doesn't have it in her?
Tubular Exhaust manifold (Ebay)
CT20B Fresh rebuild
3" Downpipe (Ebay)
2.75" to 3" JDM full exhaust (Single out)
Greddy Intake filter
NGK Copper plugs
1.5mm metal headgasket
3SGTE Toyota Engine rebuild
Stock IC
Stock new clutch
Profec B
SAFC II
Aeromotive FPR
Comments?
PEACE-
Thread Starter
not available
Joined: Aug 2000
Posts: 1,614
Likes: 0
Carlos' motor detonated and is now pretty much entirely trashed.
On a side note I took the plunge and bought a stand alone. Apexi Power FC with datalogit. Should be here next week.
On a side note I took the plunge and bought a stand alone. Apexi Power FC with datalogit. Should be here next week.
Kung Fu comes standard™
Joined: Jul 2004
Posts: 604
Likes: 0
are we talking about the carlo that races bikes?
i worked with him for a while, he wanted to sell me a bunch of parts, but then he quit the job. last i heard he is rebuilding the 2 in tampa. i heard it's white? never actually seen the car.
i worked with him for a while, he wanted to sell me a bunch of parts, but then he quit the job. last i heard he is rebuilding the 2 in tampa. i heard it's white? never actually seen the car.
__________________
Sarasota's Premier Automotive Community
Sarasota's Premier Automotive Community
Turbo Upgrade
