hey guys im in the process of trying to pull my engine out and rebuild the block. having some issues serperating the tranny from the block. i got all 6 bolts, the two nuts, and i released the clutch fork... but still no dice. ol nasioc is about as useful as ever(so i read alot and got no where), just seeing if anyone local had some spare weekend time to help me out. i offer some car work, good company, and your choice of beer =) let me know if anyone is interested

 

It might help to post your location.

 

yea that would help huh? well for future reference im right outside of south tampa. did manage to get the block out.... took some home made chisels and alot of hammering. going to take her apart this week and determine whether or not i can reuse the block or not. anyone know a machine shop around here that will bore out my cylinders and heads?

 

I think he meant an adress . I think I replied to your thread bro. I was serious about jacking the tranny up and just pry bar that sucker out slowly. I just put a new motor in mine so its all fresh in the noggin give me a date and I can see if I can help you.

 

yea i think you did. it wasnt too fun they were stuck pretty good, those guiding bolts at the bottom were the culprits, wouldnt let the engine slip out. for the time being im alright but when the rebuild starts and i have to put everything together ill see if your still down to help out. same thing applies beer of choice and some work lol.

 

ya i had the same problem but ya the pry bar works great for them 2 sliders!!!

 

Dude spray some pb blaster let her sit for a while and just keep prying!
It took me a while!!!!