Tampa Racing

Subaru Tech All We'll Drive

inatall help

Thread Tools
 
Old Sep 7, 2008 | 01:29 AM
Share
  #1 (permalink)  
anarchypro's Avatar
anarchypro
Thread Starter
fozzy tech
 
Joined: Aug 2007
Posts: 630
Likes: 0
Default inatall help
ok how hard it it to install my newly acquired sti intake manifold??

i want this


in here


help
__________________
Tampa bay tuned inc.
Reply
0
Old Sep 7, 2008 | 05:29 AM
Share
  #2 (permalink)  
djerickd's Avatar
djerickd
CHILLING SPREE!!!
 
Joined: Mar 2006
Posts: 2,721
Likes: 0
Default
start un-bolting it it's simple but, that is a pain just for a red manifold...

I'd do the TGV's while you had it apart for some real airflow benefit.
__________________

SnowMan Tuned
Reply
0
Old Sep 7, 2008 | 05:51 AM
Share
  #3 (permalink)  
anarchypro's Avatar
anarchypro
Thread Starter
fozzy tech
 
Joined: Aug 2007
Posts: 630
Likes: 0
Default
thats wut i was thinkng of doing, what dose it cost to do the tgv's
__________________
Tampa bay tuned inc.
Reply
0
Old Sep 7, 2008 | 06:10 AM
Share
  #4 (permalink)  
djerickd's Avatar
djerickd
CHILLING SPREE!!!
 
Joined: Mar 2006
Posts: 2,721
Likes: 0
Default
free if you got the tools, if you get an extra set you can do them on the side then do the swap in a few hours. LD or S&R might have an extra set:
https://www.tamparacing.com/forums/s...v-deletes.html
__________________

SnowMan Tuned
Reply
0
Old Sep 7, 2008 | 07:31 AM
Share
  #5 (permalink)  
LDadrenaline's Avatar
LDadrenaline
yeah, I drive a miata
 
Joined: Mar 2006
Posts: 1,751
Likes: 0
Default
yep, Mike at S&R has the ones that came off my car. He may sell them, call over there at 813-961-0609 or send him a PM (MRanlet)
__________________
[/center]
Reply
0
Old Sep 7, 2008 | 07:37 AM
Share
  #6 (permalink)  
josh06wrx's Avatar
josh06wrx
Registered User
 
Joined: Dec 2006
Posts: 168
Likes: 0
Default
i had a local shop port/thread & plug mine for $40. get new gaskets. id get the mani ported while you are at it. otherwise you just did a huge pita project for no performance gain.
Reply
0
Old Sep 7, 2008 | 08:23 AM
Share
  #7 (permalink)  
anarchypro's Avatar
anarchypro
Thread Starter
fozzy tech
 
Joined: Aug 2007
Posts: 630
Likes: 0
Default
Originally Posted by josh06wrx
i had a local shop port/thread & plug mine for $40. get new gaskets. id get the mani ported while you are at it. otherwise you just did a huge pita project for no performance gain.
alright cool that is the direction i will go thanks
__________________
Tampa bay tuned inc.
Reply
0
Back to Subforum
Subaru Tech
View Next Unread
Holy Subarus




Advanced Search

All times are GMT -8. The time now is 07:14 PM.