I was wondering if the 6 speed sti tranny, would bolt up to the 2.0 block. I have searched, and cant seem to find any answers to my questions. Some help would be cool thanks

 

yes i believe it will, however (I THINK) you will need drive shaft, axles and rear diff.

 

yes it bolts right up. to use as a replacement to the 5 speed you need to use the 6 speed drive shaft, shifter linkage, axles (depending on your year) and r180 rear diff or a r160 with 3.90 r&p. if you use the r180 you also need to replace the hubs. you can use the 5 speed flywheel and clutch as long as you use the 5 speed shifter fork. if you use the 6 speed clutch and flywheel you have to use the 6 speed shifter fork.

 

thanks for that info i knew i would need the rear diff , but as for the drive shaft isnt it the same length ???

 

no the drive shafts are different.

 

i have a 2002

 

ok thanks

 

well i take that back, the drive shaft is the same as an automatic drive shaft.

i don't really count autos though

 

naa me either
what do think this swap would run me, b/c i would love to do a full sti motor swap, but i just moved here from ct and the funds say i cant do it ?

 

full jdm trans swaps can be had for 4k shipped. which is everything you need and either a r180 or r160w/3.90