Djerikd needs to make a writeup.
Thread Starter
Just for decoration
Joined: Dec 2003
Posts: 10,868
Likes: 0
Djerikd needs to make a writeup.
for the intercooler water sprayer. 
I have been looking for some kits online but if you could make a nice writeup I would appreciate it.
I have been looking for some kits online but if you could make a nice writeup I would appreciate it.
__________________
R.I.P. Brian Nichols 02/07/1989-11/24/2008
R.I.P. Brian Nichols 02/07/1989-11/24/2008
Registered User
Joined: Aug 2005
Posts: 784
Likes: 0
This is a good one for how to put one in:
ScoobyMods - Intercooler (IC) water spray system.
and this one
STi intercooler sprayer - ClubWRX Forum
i have not tried to build one yet but I may try
ScoobyMods - Intercooler (IC) water spray system.
and this one
STi intercooler sprayer - ClubWRX Forum
i have not tried to build one yet but I may try
__________________
6 letters spell it, 5 lifters be ticking on it, 4 cams spinning on it, 3in cutout on it, 2 heads flowing on it, 1 turbo creeping on it, SUBARU.
Osecuroms.org Opensource Stage II 2006 wrx 281 downloads and counting
Osecuroms.org Opensource Stage II 2006 wrx 281 downloads and counting
Pm me about Subaru Tuning
Giggity Giggity Gone
Joined: Dec 2005
Posts: 1,064
Likes: 0
i can show him how to make one from the existing windshield washers like i did. i never used my windshield washers and rigged it so that i can manually control a sprayer using the factory pump and tank. costs me less than 5-6 bucks to make the whole thing.
CHILLING SPREE!!!
Joined: Mar 2006
Posts: 2,721
Likes: 0
Those links are good as a guide.
What you really need essentially is a place to hold the water, a pump to push it, a nozzle or 2 to distribute in a mist, and a switch to contol it.
Tank - I have a coolant return tank mounted in my trunk
Pump - I have a windshield washer pump mounted directly on the tank with self tapping screws and silicone to seal.
Switch - I have a cheap momentary switch on my dash to turn on the pump as needed.
Lines - cheap plastic line I think it's 3/8" ID (look for what fits the pump and get enough to reach)
wires - to ground the pump and run the 12+
You can make any trigger your "switch" it's up to you how eleborate you want to get. For instance mine only works with the ignition on since it gets 12+ from the ignition.
It's really up to you how you want the system to function, it's just a basic water pump. I actually rarely use it and will probably install watergun nozzles aimed outward to spray people as I drive by.
I was going to use these same concepts to build my own meth/water injection kit (basically the same concept, to pump a fluid from a tank) but I picked up a sweet Aquamist sponsorship - more details to come...
What you really need essentially is a place to hold the water, a pump to push it, a nozzle or 2 to distribute in a mist, and a switch to contol it.
Tank - I have a coolant return tank mounted in my trunk
Pump - I have a windshield washer pump mounted directly on the tank with self tapping screws and silicone to seal.
Switch - I have a cheap momentary switch on my dash to turn on the pump as needed.
Lines - cheap plastic line I think it's 3/8" ID (look for what fits the pump and get enough to reach)
wires - to ground the pump and run the 12+
You can make any trigger your "switch" it's up to you how eleborate you want to get. For instance mine only works with the ignition on since it gets 12+ from the ignition.
It's really up to you how you want the system to function, it's just a basic water pump. I actually rarely use it and will probably install watergun nozzles aimed outward to spray people as I drive by.
I was going to use these same concepts to build my own meth/water injection kit (basically the same concept, to pump a fluid from a tank) but I picked up a sweet Aquamist sponsorship - more details to come...
