New cluch install with pics
Thread Starter
Registered User
Joined: Jan 2004
Posts: 59
Likes: 0
New cluch install with pics
I just got my ACT clutch and Streetpro flywheel installed. The flywheel is very light. I am still braking the clutch, I am going to be easy on it until 500 miles then I get to have fun with it. Also Its harder to push in then stock but thats fine with me. I know its the presure plate. I don't have any big problems right now. The only thing is the clutch catches really low like to the floor. I really don't know how to fix that yet. This weekend I am going to take a look at it then.
Sorry about the pics it was the only cam that I had that day.
Sorry about the pics it was the only cam that I had that day.
Last edited by nofearnick; Jan 8, 2007 at 05:47 PM.
Gravel fiend
Joined: Jul 2005
Posts: 1,090
Likes: 0
The clutch engagement point can be adjusted.
Here's the 2004 wrx manual page on doing that. There's a second page right after this one but it only has 2 items:
Apologies for the shitty quality on teh manual page. TR only allows a maximum height of 768, rather than the native image's height of 785 so I had to resize it and it didn't end up being that good. If you can't read it, let me know.
Here's the 2004 wrx manual page on doing that. There's a second page right after this one but it only has 2 items:
9) If the clutch fluid level does not increase or push
rod does not retract, clutch pedal must be readjusted.
10) Check the fluid level on the outside of the reservoir
tank. If the level is below “MIN”, add clutch
fluid to bring it up to “MAX”.
rod does not retract, clutch pedal must be readjusted.
10) Check the fluid level on the outside of the reservoir
tank. If the level is below “MIN”, add clutch
fluid to bring it up to “MAX”.
Last edited by Alizarin; Nov 22, 2005 at 07:19 PM. Reason: Added a comment about the shitty quality on the manual page
