Originally Posted by
Romeyo07
Decided to check the codes and see what the ECU has to say.
NOTE: There's an app for Android called Torque that displays ECU readings on your phone in real time. I bought a $30 obd2 bluetooth reader and the app, which was like $5. Next best thing to a data logger IMO.
P0136: O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)
P0141: O2 Sensor Heater Circuit (Bank 1 Sensor 2)
P0120: Throttle/Pedal Position Sensor/Switch A Circuit
P0443: Evaporative Emission Control System Purge Control Valve Circuit
P1105: [Mitsubishi] Fuel Pressure Solenoid.
P0403: Exhaust Gas Recirculation Control Circuit
Pending Fault Log (not sure what this means, but I'm guessing it's seeing a possible error)
------------------
P0136: O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)
P0141: O2 Sensor Heater Circuit (Bank 1 Sensor 2)
P0120: Throttle/Pedal Position Sensor/Switch A Circuit
P1400: [Mitsubishi] Manifold Differential Pressure Sensor circuit.
P0443: Evaporative Emission Control System Purge Control Valve Circuit
P1105: [Mitsubishi] Fuel Pressure Solenoid.
P0403: Exhaust Gas Recirculation Control Circuit
the pending log are the code that u are having an issue with its just a history
once u fix those codes and clear the ecu wont be there if u manage to fix the codes
1 thing at a time bro u will get it
clear the codes and history too see what comes up from a fresh start up
put some new o2 sensors in see if those codes disappear
same with the TPS or if u have a working one
clean the EGR with carb cleaner and see if the code comes back
and as for the evap stuff good luck.... if u manage to fix ur EGR it might correct ur evap stuff