Originally Posted by
Aoshi
its plastic with metal guides, it'd break immediately. I'd though about trying to bend the piece that the sensor attaches to.
However, I'm looking more towards the reason the car is running this way, also the voltage on the high end is only 4.5, my manual says it should be closer to 5 volts. So if I adjust it to be lower then it'll be closer it'll go down to 4.3 on the high end..
R u sure you that you checked it corretly?key car off.throttle plate closed it should be from .50 to 1.0 at idle and shouldnot go above 5. at full throttle.you must have one of those newer style tps sensors,because i have never seen one with a metal guide in it.