Originally Posted by
budakinns
well i got the bolt that was connected to the front cover off. now i ran into another road block the other bolts wont move period. i soaked them in wd-40 and still broke one of my extensions. imma soak them some more before i try again but my question now is. if i used an inpact to remove the bolts would that be a good or bad idea?
Im guessing the shorter hose is bad?
I actually think i still have one laying here..
ANYWAYS...
Heres what you need to do to be safe.. the one to the front cover.. Bring that adaptor also.. Cause if I remember correctly,When I got material from them to make my own custom hoses,they had to match some fittings,but I got the anodized fittings.Material costed me like $150.
DO NOT USE an impact on that shit.
I cant believe you would think about it.Spin that steel bolt out of that aluminum to fast you can fuck some threads up.
Either you have cheap tools or you dont know what you are doing,or both..
I have a 2 foot breaker bar and a 24mm socket,if thats correct..
What area do you live?