FS: LS400 Drift Race Car Kt! WTF?!
You're looking at one tough LS400 that's got to go to a new home. I started building this car as a simple enjoyable project, but an electrical repair snowballed into a full out striped down caged up serious drift race car! Here we are, 800lbs lighter, almost 20 degrees more steering angle, fully TIG welded tight-fitting Formula D and NASA-spec cage (door bars waiting to go in until interior work is completed), and infinite-way locking differential this thing will do work once it's together again! I wish I could keep it, but I've got so many cars to build before this one that I'd rather pass it along to someone who will get to work on it and then rape the hell out of it once it's done.
As you can see in the pics, the car is without engine, trans or harness. It's not rusty, it's just really dirty. This car is so tough it will stop bullets, no exaggeration.




To give you an idea of what this car normally looks like...



and a little video my buddy took:
war-machine on Vimeo
And check out the build over at JZXproject. There's really lots of build coverage to look at, way too many details to list:
FUCK PRO DRIFTING - UCF11 - JZXProject - Page 7
Just because I'm a nice guy, I figured I'd sweeten the deal a little by throwing in another car!


This car is the one that went into the wall at CFRC, good for all its running gear. Engine, harness and ECU are all solid, as are most of the control arms to have around as spares for when you wreck them. It also has a hand Ebrake, welded differential, Sparco racing seat, RJS harness and probably some other stuff I can't remember. When together it will keep up with SR-swapped Nissan 240sx and dominate most Hondas. Depending on what you decide to do for drivetrain (manual vs automatic), suspension, wheels, etc a savvy person could get this car blasting away for about an additional $500-1000.
$2500 TAKES IT ALL!!
If you're interested at all you really just need to come see it. I respond best to text at 941.224.7235 but will call you back if I am unable to answer.
Thanks for looking!
As you can see in the pics, the car is without engine, trans or harness. It's not rusty, it's just really dirty. This car is so tough it will stop bullets, no exaggeration.




To give you an idea of what this car normally looks like...



and a little video my buddy took:
war-machine on Vimeo
And check out the build over at JZXproject. There's really lots of build coverage to look at, way too many details to list:
FUCK PRO DRIFTING - UCF11 - JZXProject - Page 7
Just because I'm a nice guy, I figured I'd sweeten the deal a little by throwing in another car!


This car is the one that went into the wall at CFRC, good for all its running gear. Engine, harness and ECU are all solid, as are most of the control arms to have around as spares for when you wreck them. It also has a hand Ebrake, welded differential, Sparco racing seat, RJS harness and probably some other stuff I can't remember. When together it will keep up with SR-swapped Nissan 240sx and dominate most Hondas. Depending on what you decide to do for drivetrain (manual vs automatic), suspension, wheels, etc a savvy person could get this car blasting away for about an additional $500-1000.
$2500 TAKES IT ALL!!
If you're interested at all you really just need to come see it. I respond best to text at 941.224.7235 but will call you back if I am unable to answer.
Thanks for looking!
__________________

BTTS, STFU&D

BTTS, STFU&D
Last edited by mranlet; Jan 24, 2012 at 05:06 PM.
Bump for this motha fatha right here. Sweet drift racecar
__________________

1983 AE71 Corolla- 16v 4age... racecar
1993 D21 Hardbody- a/c, music... grocery getter
- Garrison -

Just throwing it out there, by the looks o your car you can make anything work on it.
1993 D21 Hardbody- a/c, music... grocery getter

- Garrison -
Thread
Thread Starter
Forum
Replies
Last Post
guitarz0
Cars For Sale / Wanted
46
Sep 25, 2008 06:58 PM



