FS: K-Series K24A1 with 12.5:1 CP Pistons (New) & K20-R Head
Registered User
Thread Starter
Join Date: Jun 2007
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
FS: K-Series K24A1 with 12.5:1 CP Pistons (New) & K20-R Head
Location: california
Sadly but it has now come to the moment to where i must part from the K-Series project due to some crappy events that led me to lose a lot of money...
K24A1 (2002 Honda CRV short block with approximately 45k miles)
Brand New CP Pistons (SC7147X) 12.5:1 Compression with rings/wrist pins (Never Installed)
87mm Pistons
Nothing a bead blast cant fix... Its a little dirty
*NOTE I SUCK AT USING MY SONY CYBERSHOT****
K20 RSx Type-R Head (have a Type S intake manifold, Throttle body, injectors, fuel rail)
Use this 99mm stroke to make an all motor beast.
Stock Bore... Motor was disassembled to prep to go to machine shop and to send crank out to be balanced but of course that was never done either.. All parts are included.. They were carefully all placed into one box that contains all the necessary parts to reassemble the block...
Bolt on the k20 head and see that all motor compression do work... My loss is your gain..
Asking $2300... Plus Shipping.. (if preferred.. will ship without stock pistons and rods to save weight on shipping)
Will Accept Trade Offers if reasonable...
Will Post Pictures up tonight
Sadly but it has now come to the moment to where i must part from the K-Series project due to some crappy events that led me to lose a lot of money...
K24A1 (2002 Honda CRV short block with approximately 45k miles)
Brand New CP Pistons (SC7147X) 12.5:1 Compression with rings/wrist pins (Never Installed)
87mm Pistons
Nothing a bead blast cant fix... Its a little dirty
*NOTE I SUCK AT USING MY SONY CYBERSHOT****
K20 RSx Type-R Head (have a Type S intake manifold, Throttle body, injectors, fuel rail)
Use this 99mm stroke to make an all motor beast.
Stock Bore... Motor was disassembled to prep to go to machine shop and to send crank out to be balanced but of course that was never done either.. All parts are included.. They were carefully all placed into one box that contains all the necessary parts to reassemble the block...
Bolt on the k20 head and see that all motor compression do work... My loss is your gain..
Asking $2300... Plus Shipping.. (if preferred.. will ship without stock pistons and rods to save weight on shipping)
Will Accept Trade Offers if reasonable...
Will Post Pictures up tonight
__________________
90% grind 10% sleep
Join Date: Nov 2002
Posts: 6,963
Likes: 0
Received 0 Likes
on
0 Posts
how much for head and pistons only?
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
