WTB SRT-4 fuel rail
I have an 05 SRT rail ....
20 bucks its yours
20 bucks its yours
__________________
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
why do you need one? a SOHC fuel rail will fit a SRT4 manifold just to let you know...and it has a schrader valve as well...only thing is...you do need to use a couple nuts as spacers since the SOHC mounting tabs arent quite long enough...
i have a custom built intake manifold on it and a stock 99 neon rail.the srt injectors are like 3/4 shorter than the ones that fit with this rail, there wouldent be a proplem with cutting the rail and remounting it but the shrader valve is in the middle and right now at that height its very close to just going strait into the back of the manifold.its hard to explain but the manifold is like the blackdog or the mopar race ones that look like square tube.so i cant cut it down.therefor we need a 03 srt rail with the side exit schrader valve so i can bolt it up and have all the room in the world to put the return line.the 04 - 05 rails i heard dont have the valve so it has to be 03.or if anybody has a aftermarket rail like aem or whatever with a return line opening that they want to sell for a neon.we can use that to.
so you wanr a shrader valve rail or a non ?
__________________
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped