The Projects Watch out in this hood ! Current And Past Ford Project Topics Only.

302 swapped 240sx

Old Feb 20, 2010 | 05:54 PM
  #41 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

Ok. Car pissin me off. Now fs. Make an offer. Need a decent car for daily. Don't have to look good just run good. Reson, boosted car. Blew oil feed off,fixed but needs to be mass air and rom tuned to be right and I don't wanna keep playing with it or put any money in it. Runs great as long as you don't give it more than 30%throttle cuz it started to spool and lean out.I've full boosted it once and hit 7psi at 2100rev per min but let off cuz it Needs tuned bad. Going to build another,after I put a 460 big block in a BMW 5series. not taking under 2.5k unless you have a car to trade also
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )

Last edited by rodknock; Feb 20, 2010 at 05:56 PM.
Reply
Old Feb 22, 2010 | 05:39 AM
  #42 (permalink)  
flyspyder55's Avatar
Registered User
 
Joined: May 2005
Posts: 2,545
Likes: 0
Default

what did you use for the oilpan... fox body pans dont seem toi come close.
__________________
Branden Berger
352-789-0006

86.5 toyota supra- 1jz never to be finished
01 mitsu eclipse v6 5mt chick car daily
98 honda accord ex- h22 swapped daily driver
Reply
Old Feb 22, 2010 | 01:10 PM
  #43 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

Front sump truck pan. You have to dent it a lil. The twin sump won't work unless you cut the trans tunnel and fire wall
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )
Reply
Old Feb 28, 2010 | 12:58 PM
  #44 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

Well got car dyno tuned yesterday. It's down now lol over 400 rwhp on 9 psi and 3rd pull it blew the head gaskets so looks like my arp studs and gt40 heads are going on sooner than a thought. Then retune on 12psi
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )
Reply
Old Mar 5, 2010 | 05:54 PM
  #45 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

update,i got my head studs,head gaskets,intake gaskets,oil and oil filter in.I painted valve covers and pullys and blasted the upper and lower intake,new water pump will be here tomorrow. below are pics of valve covers,pully's and intake on moch up motor
Attachment 128717

Attachment 128718

Attachment 128719

Attachment 128720

Attachment 128721
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )
Reply
Old Mar 10, 2010 | 07:58 AM
  #46 (permalink)  
markstheman365's Avatar
cant slide
 
Joined: May 2008
Posts: 2,441
Likes: 0
Default

^ dam thjis thing is nasty... i dont have your number anymore but shared_pm me about this saturdays event
__________________
contact admin@tamparacing.com to advertise on here.. - mod
Reply
Old Mar 11, 2010 | 08:50 PM
  #47 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

pm'd
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )
Reply
Old Mar 20, 2010 | 08:51 PM
  #48 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

so new update.cut spare tire hole out,stripped the interior for the upcoming cage and removed the gas tank.I will be running a fuel cell soon and decided to change the set up from single turbo to twin 50 trims,60lb or bigger injectors and megasquirt stand alone with antilag,c4 transmission with a 3200-3500 stall converter and a trans brake.It's going to be a month or so before it's back on the street again.might not be ready for the next street heat
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )
Reply
Old Mar 20, 2010 | 09:03 PM
  #49 (permalink)  
DasEG's Avatar
Registered User
 
Joined: Nov 2008
Posts: 416
Likes: 0
Default

i can def say tis is a clean set up i seen it in person .... gl wit ur project bro....
__________________
Custom H22 Eg in Da Making ┌∩┐(◣_◢)┌∩┐
Reply
Old Mar 30, 2010 | 08:57 PM
  #50 (permalink)  
rodknock's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 145
Likes: 0
Default

god i hate the stock heads........buying 351w heads asap. pulling turbo stuff off and going to run n/a for now...at least untill i save enough $ to finish my tt set up
__________________
Single turbo 302 powered 240sx hatch ( soon to be twin turbo )
Reply


All times are GMT -8. The time now is 01:03 PM.