Setting S14 KA TPS Voltage
Thread Starter
Registered User
Joined: Jul 2007
Posts: 2,743
Likes: 0
Setting S14 KA TPS Voltage
So i got my new tps from nissan. Installed it and everything. Went to set the tps voltage using the write up on nico. Followed it but im getting wayyyyy different voltage readings from what the write up says. I noticed that the write up is on a S13 KA. Im pretty sure the tps is different from an S14. I have the Two connector tps. A 3-wire connector and a 2-wire connector. If anyone can help me out that would be awesome.
__________________
KA-T.
Enthalpy Tuned.
KA-T.
Enthalpy Tuned.
Retired
Joined: Jan 2003
Posts: 5,095
Likes: 0
Too lazy to go look up the wire colors. Just probe all 5 wires with a voltmeter until you find the one that is in the 0.3-1.0V range. Adjust the TPS to hit the voltage you want. You can ground the meter to the intake manifold. It's probably one of the 3-wire connections.
__________________
buildin' it
Joined: Aug 2006
Posts: 4,565
Likes: 0
Too lazy to go look up the wire colors. Just probe all 5 wires with a voltmeter until you find the one that is in the 0.3-1.0V range. Adjust the TPS to hit the voltage you want. You can ground the meter to the intake manifold. It's probably one of the 3-wire connections.
boom!
Thread
Thread Starter
Forum
Replies
Last Post
