I don't know anymore where to post stuff in the Nissan section so I figured I'd start here and if it doesn't go here a mod will move it.

I have a friend w/ a 91 Z32TT that upgraded to the rotora 14in brake kit. Knowing he had the 30mm aluminum ones I asked if I could get them from him. He's a really nice guy and was like sure here ya go. and handed them to me in the rotora box and said Merry Christmas... I was like whoa wait how much do I owe you for these, the next thing out of his mouth was what really shocked me. "I don't know you come up with a price and just pay me whatever you think is fair.

So my question is this, he gave me all 4 calipers, and all the lines that go with them, what is the common price of these?

 

350 ish, you can't use the lines he gave you.

 

if he doesn't give a fuck, pull a joe dirt, and say "i only have what's in my pocket" and give him .14C

 

friends give friends free shit

 

For mega used calipers, with used pads, no rotors, and unuseable lines, I usually pay $50 a pair. Might not sound like much, but once you put new decent pads with shim kit, conversion lines and rotors on it, you'll be closer to that quoted $350 out of pocket total.

 

^ junkyard?

Op: The 350ish I guestimated earlier was for a set of all 4 with all the hardware in excellent condition. If they are ragged out and need to be rebuilt then that price adjusts accordingly.

 

Thanks for the input guys, they're actually in what appears to be really good condition I don't know if you can tell condition by pics but I'll post some. They were working on his car he said he finished fully building his suspension that brakes were his next priority so he bought the rotora kit.

 

^ check the seals around the pistons on the inside of the calipers, also check the calipers for warping.

 

you can pick up the fronts new from advance for 55 ish bucks...

Brake Caliper-Front by Cardone Friction Choice - Part 3755967 - Advance Auto Parts

just sayin...

 

i think 300-350 is average price. they are 280mm x 30mm, and i think the 280's look a tad small with 18" wheels. i have R32 GTR front brakes and they fill up the area nicely. Im not sure if its on here, but here's this too from Zilvia. Just a nice thing to have.
R32 T : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T (early) : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T type m : 280mm x 30mm (4 pot sumitomo caliper)
R32 GTR : 296mm x 32mm (4 pot sumitomo caliper)
R32 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-4 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)
R33 GTR : 324mm x 32mm (4 pot brembo caliper)
R33 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R34 GT : 296mm x 30mm (4 pot sumitomo caliper)
R34 GTT : 310mm x 30mm (4 pot sumitomo caliper)
R34 GTR : 324mm x 32mm (4 pot brembo caliper)
Z33 NA : 324mm x 32mm (4 pot brembo caliper)
Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)
Z32 TT : 280mm x 30mm (4 pot ali sumitomo caliper)
S14, S15 : 280mm x 30mm (4 pot sumitomo caliper)