Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

injector prob? ka-vert

Thread Tools
 
Old Jun 9, 2009 | 02:22 PM
  #1 (permalink)  
tampadriftx's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 47
Likes: 0
Default injector prob? ka-vert

im getting spark from tha distributer and thru tha wires but #3 not firing. cant be tha injector cuz im gettin power only on one side of tha injector plug. wiring prob? has any one had this prob,i was also told that it could be tha ecu but very rare just put new plugs in and switched wires around hoping that was it but not my luck. no compression ruled out also cuz im not gettin power on both sides of injector plug some body tell me somethin good
Reply
Old Jun 9, 2009 | 03:04 PM
  #2 (permalink)  
tampadriftx's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 47
Likes: 0
Default

ttt
Reply
Old Jun 9, 2009 | 03:28 PM
  #3 (permalink)  
Z28ricer's Avatar
Doesnt see what you did
 
Joined: Sep 2007
Posts: 3,683
Likes: 0
Default

One side is ign+, the other side is a ground, fired by the ecu, you'll have to test with a noid light to make sure its firing that cylinder, chances are you've got something bad on the ignition side.
__________________
Originally Posted by osama tim laden
full on track cars can take a lot more liberties with shit than a street car. bell bottom kits and crazy wheel fitment look cool sliding on a track, but when i want to drive to taco bus, im going to ruin all of that shit. so it just doesnt work for me. function over fashion.
Originally Posted by osama tim laden
also, im about to blow my moderator status by deleteing all of davids posts
R.I.P. Tim

SR, RB, and LS1 into S13/14 harnesses converted.

SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
Reply




All times are GMT -8. The time now is 10:45 PM.