I've got a slave cylinder laying around for a KA and I'm wondering if it will work on my SR tranny. I have to pump the clutch in the mornings because there is about an inch and a half of play in the pedal but after that it's fine for the rest of the day. Thanks

 

yes

 

yeah, as far as I know, they are the same...
It should just bolt right up for ya.
make sure you bleed the hell out of the system afterwards...

 

I've gotten quite good at bleeding the brakes and clutch on this car, it seems like every time I work on the car I have to bleed one or the other for some reason.

 

yeah, I know the feeling. I went through that phase with my coupe a while back....

 

yes, the rear of the tranny is interchangable and exactly the same as the one on the kas except the dust cover at the end is bigger on the sr. same parts. commen swap i a sr end with ka bellhousing.