Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

Help me and I'll buy your a 6 pack.

Thread Tools
 
Old Mar 16, 2008 | 07:50 PM
  #1 (permalink)  
Clawhammer's Avatar
Thread Starter
BELOW M3
 
Joined: Oct 2006
Posts: 2,121
Likes: 0
Default Help me and I'll buy your a 6 pack.

For those of you that read my last thread, my car was blowing the ignition switch fuse left and right. I narrowed it down to the wire that goes to the inhibitor switch, and then to the starter. I had to get back to Gainesville ASAP so rather than hunting for how that's all wired up I ran a new wire from my starter straight to the push button I have for my starter (lock cylinder assembly doesn't really turn the switch all the way and it was cheaper and easier to buy a button for $5 rather than shell out $180 for a whole new assembly). With the new wire run, I cut the wire on the ignition switch, eliminating that whole loop...my understanding from the FSM is it goes:

Ignition Switch > Inhibitor Switch > Starter

I don't know what was done with the wires when my SR and 5spd swap were done, but I do know the car worked after I ran the new wire. I drove around the Clearwater area for quite a while, running errands and stuff before leaving for Gville late Friday night. I drove back and used the car all day yesterday (Saturday) without a hitch. This morning I'm on my way to work and made it about 2 buildings away from my apartment in my complex before it popped the same fuse.

Now I'm back to square one. What the deuce? I was so pissed I just jumped the fuseable link with a heavy gauge wire, set my alarm, and got a ride to work.

Oh and when the IGN SW is jumped and I turn the key to ON the EGI (ECCS) relay buzzes.

This car is dead to me.
__________________
2008 R1 | 2004 ///M3
Reply
Old Mar 16, 2008 | 08:34 PM
  #2 (permalink)  
+Waldo+'s Avatar
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Default

fuck bro.... sorry to here, and even more sorry i cant help yah but here is a free bump, and a good luck
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply
Old Mar 17, 2008 | 05:02 AM
  #3 (permalink)  
Clawhammer's Avatar
Thread Starter
BELOW M3
 
Joined: Oct 2006
Posts: 2,121
Likes: 0
Default

Yeah, just when I thought it was over and done with, and the headache was fading into memory BAM it kicks me in the nuts.
__________________
2008 R1 | 2004 ///M3
Reply
Old Mar 17, 2008 | 05:41 AM
  #4 (permalink)  
presidential's Avatar
OG Join Date: 6-15-00
 
Joined: Jul 2007
Posts: 4,894
Likes: 0
Default

Who wired it? I'd take it back to them to be honest.
__________________


1973 VW Squareback
1979 AMC Jeep Cherokee Chief


RIP Tim

Reply
Old Mar 17, 2008 | 08:29 AM
  #5 (permalink)  
DriftingDJ's Avatar
240LSX
 
Joined: May 2004
Posts: 2,456
Likes: 0
Default

I can help you fix it but you would have to bring the car to me and a 12 pack. I don't know if you can ghetto engineer it to run again and come over.
__________________

Reply
Old Mar 17, 2008 | 08:56 AM
  #6 (permalink)  
Clawhammer's Avatar
Thread Starter
BELOW M3
 
Joined: Oct 2006
Posts: 2,121
Likes: 0
Default

lol I'm about to cut every wire on the ignition switch and wire them to toggle buttons. You'll have to know which ones to flip in which order, it'll be like starting the space shuttle. Try to steal my shit haha.
__________________
2008 R1 | 2004 ///M3
Reply




All times are GMT -8. The time now is 04:12 PM.